MX-2300N, MX-2700N, MX-2300G, MX-2700G, MX-2300FG, MX-2700FG (serv.man129). 031-SETTING OF SCANNER DRY HEATER AS SERVICE PART. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man129) Technical Bulletin online

Sharp Electronics (UK) Ltd., Technical Services Group
CCE-299R
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the direction of the arrow. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp unit by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror unit.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
Page of 5
Display

Download Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man129) Technical Bulletin