Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man28) User Guide / Operation Manual online
DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM
Safety Guide
Safety Guide
Safety Guide
Before installing this product, be sure to read the
"CAUTIONS" and "INSTALLATION
REQUIREMENTS" sections.
"CAUTIONS" and "INSTALLATION
REQUIREMENTS" sections.
SPECIFICATIONS
INFORMATION ON DISPOSAL
SUPPLIES
INSTALLATION REQUIREMENTS
CAUTIONS
TO THE ADMINISTRATOR OF THE MACHINE
Keep this manual close at hand for reference
whenever needed.
whenever needed.
MX-2300N
MX-2700N
MX-2700N
MODEL:
mx2700_gb_saf.fm -1 ページ ２００５年１１月１日 火曜日 午後４時５１分
EMC (this machine)
EMC (peripheral devices)
Warranty
While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no
warranty of any kind with regard to its content. All information included herein is subject to change without notice. SHARP is not
responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual.
© Copyright SHARP Corporation 2005. All rights reserved. Reproduction, adaptation or translation without prior written permission is
prohibited, except as allowed under copyright laws.
warranty of any kind with regard to its content. All information included herein is subject to change without notice. SHARP is not
responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual.
© Copyright SHARP Corporation 2005. All rights reserved. Reproduction, adaptation or translation without prior written permission is
prohibited, except as allowed under copyright laws.
Caution!
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Shielded network cable and USB cable must be used with this equipment to maintain compliance with standards.
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment has been tested and found to comply with the limits for a Class B digital device.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Required in IEC-950 (EN 60 950) - Europe
• The equipment should be installed near an accessible socket outlet for easy disconnection.
• The equipment should be installed near an accessible socket outlet for easy disconnection.
Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom
MAINS PLUG WIRING INSTRUCTIONS
The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable
(moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse
to BS1362 marked or
(moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse
to BS1362 marked or
and of the same rating as the one removed from the plug must
be used.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without
the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied
either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable
plug is fitted and fit an appropriate type observing the wiring code below.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without
the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied
either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable
plug is fitted and fit an appropriate type observing the wiring code below.
DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately
and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted
elsewhere into a 13A socket outlet as a serious electric shock may occur.
and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted
elsewhere into a 13A socket outlet as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW:
Earth
BLUE:
Neutral
BROWN:
Live
As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug
which is marked with the letter E, or by the safety earth symbol
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug
which is marked with the letter E, or by the safety earth symbol
Å@
, or coloured green or green-
and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter
N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured red.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter
N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured red.
If you have any doubt, consult a qualified electrician.
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: THIS APPARATUS MUST BE EARTHED.
➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➢
➣
➢
➣
➢
➣
➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➢
➣
➢
➣
➢
➣
➢
➣➢➣➢➣➢➣➢➣➢➣
➢
➣➢➣➢➣➢➣➢➣➢➣➢➣➢
➣➢
➣➢
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➢➣
➢➣
➢➣
➢➣➢➣➢➣➢➣➢➣➢➣
➢➣➢➣➢➣➢➣➢➣➢➣➢
➣
➢
➣
➢
➣
➢
➣
➢➣➢➣
➢➣➢➣➢➣➢➣➢➣➢➣
➢
➣
➢
➣
➢➣➢➣➢➣➢➣➢➣➢➣➢
mx2700_gb_saf.fm 0 ページ ２００５年１１月１７日 木曜日 午前１１時９分
1
Contents
CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser information . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INSTALLATION REQUIREMENTS . . . . . . . . . . . . . 4
SUPPLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Storage of supplies. . . . . . . . . . . . . . . . . . . . . . . . . 5
Supply of spare parts and consumables . . . . . . . . 5
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Machine specifications / copier specifications . . . . 6
Continuous copying speeds . . . . . . . . . . . . . . . . . . 8
Printable sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ambient environment . . . . . . . . . . . . . . . . . . . . . . . 8
Acoustic noise emission (measurement according to
ISO7779) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ISO7779) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Emission concentration (measurement according to
RAL-UZ62: Edition Jan. 2002) . . . . . . . . . . . . . . . . 9
RAL-UZ62: Edition Jan. 2002) . . . . . . . . . . . . . . . . 9
Reversing single pass feeder (automatic document
feeder) specifications . . . . . . . . . . . . . . . . . . . . . . . 9
feeder) specifications . . . . . . . . . . . . . . . . . . . . . . . 9
Exit tray unit (right tray) specifications . . . . . . . . . . 9
Stand/1x500 sheet paper drawer specifications. . 10
Stand/2x500 sheet paper drawer specifications. . 10
Large capacity tray specifications . . . . . . . . . . . . 11
Finisher specifications . . . . . . . . . . . . . . . . . . . . . 12
Saddle stitch finisher specifications . . . . . . . . . . . 13
Punch module specifications (for finisher) . . . . . . 14
Punch module specifications (for saddle stitch
finisher). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
finisher). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Printer specifications . . . . . . . . . . . . . . . . . . . . . . 15
Network scanner / Internet fax specifications . . . . 16
Pull scan function (TWAIN) specifications . . . . . . 16
Optional equipment . . . . . . . . . . . . . . . . . . . . . . . 17
INFORMATION ON DISPOSAL . . . . . . . . . . . . . . . 18
A. Information on Disposal for Users (private
households) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
households) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
B. Information on Disposal for Business Users. . . 18
TO THE ADMINISTRATOR OF THE MACHINE . . 20
Factory default passwords . . . . . . . . . . . . . . . . . . 20
Forwarding all transmitted and received data to the
administrator (document administration function) . . . 20
administrator (document administration function) . . . 20
Trademark acknowledgments . . . . . . . . . . . . . . . 22
Note:
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please
contact your dealer or nearest authorised service representative.
• This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem is
discovered, please contact your dealer or nearest authorised service representative.
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its
options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due
to use of the product.
to use of the product.
As an
E
NERGY
S
TAR
®
Partner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
mx2700_gb_saf.fm 1 ページ ２００５年１１月１７日 木曜日 午前１１時１０分
2
CAUTIONS
1. Do not touch the transfer belt. Scratches or smudges on the transfer belt will
cause dirty prints.
2. The fusing unit is extremely hot. Exercise care in this area.
3. Do not look directly at the light source. Doing so may damage your eyes.
4. Four adjusters are provided on all optional stand/paper drawer units. These
3. Do not look directly at the light source. Doing so may damage your eyes.
4. Four adjusters are provided on all optional stand/paper drawer units. These
adjusters should be lowered until they contact the floor.
When moving the machine with the optional stand/paper drawer, be sure to
raise the adjusters. Also, unlock the two casters at the front of the optional
stand/paper drawer. After moving the machine, lower the four adjusters until
they reach the floor and lock the two casters.
When moving the machine with the optional stand/paper drawer, be sure to
raise the adjusters. Also, unlock the two casters at the front of the optional
stand/paper drawer. After moving the machine, lower the four adjusters until
they reach the floor and lock the two casters.
5. Do not make any modifications to this machine. Doing so may result in
personal injury or damage to the machine.
6. The machine is heavy. To prevent injury when moving the machine, it is
recommended that it be moved by four or more persons.
7. Do not make copies of anything which is prohibited from copying by law. The
following items are normally prohibited from printing by national law. Other
items may be prohibited by local law.
items may be prohibited by local law.
●
Money
●
Stamps
●
Bonds
●
Stocks
●
Bank drafts
●
Checks
●
Passports
●
Driver's licences
8. Do not use a flammable spray to clean the machine. If gas from the spray
comes in contact with hot electrical components or the fusing unit inside the
machine, fire or electrical shock may result.
machine, fire or electrical shock may result.
9. Do not throw toner, a toner container (toner cartridge), or a waste toner box
into a fire. Toner may fly and cause burns.
10. Store toner, toner containers (toner cartridges), and waste toner boxes out of the reach of children.
The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored
documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call
up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the
originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the
loss of stored document data.
documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call
up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the
originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the
loss of stored document data.
"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED SERVICE REPRESENTATIVE FOR ASSISTANCE IN
DISPOSING OF THIS BATTERY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED SERVICE REPRESENTATIVE FOR ASSISTANCE IN
DISPOSING OF THIS BATTERY.
Each instruction also covers the optional units used with these products.
Fusing unit
Adjuster
Lock
Release
mx2700_gb_saf.fm 2 ページ ２００５年１１月１日 火曜日 午後４時５１分
.jpg "View the file")
