DM-2000 (serv.man5). DM2000 Service Manual-Unpacking Installation Adjustments - Sharp Copying Equipment Service Manual (repair manual). Page 7

9) Choose the port and click the [Next] button.

Note: This screen appears only if you selected “Network printer”

in step 5).

10) Set the printer name.

<1> If you want to change the printer name, enter a new name

in the space provided.

<2> If the program displays, “Do you want your Windows-based

programs to use this printer as the default printer?”, check
“Yes”.

<3> Click the [Next] button.

11) Print a test page by clicking the [Finish] button.

Note: If you check “No” and click the [Finish] button, the printer

does not print a test page after the installation.

● The printer driver installation begins.

12) When the test page is printed properly, click the [Yes] button.

● The printer is ready for printing.

1) Turn the computer on and start Windows NT.
2) Click the Start menu, point to “Settings”, and choose “Printers”.
3) When the “Printers” window appears, double-click the “Add

Printer” icon.

4) Choose  “My Computer” or “Network printer server” and click the

[Next] button.
● The following steps use “My Computer” as an example.

For more information about using this printer as a network
printer, refer to the Windows NT 4.0 networking documentation.

5) Check the checkbox for the port you are using and click the [Next]

button.

6) Click the [Have Disk...] button.

7) Insert the SHARP Software CD-ROM into the CD-ROM drive, type

R:\English\WinNT and click the [OK] button.

8) Choose the appropriate printer driver from those listed below and

click the [Next] button.
● PCL6 Printer Driver: SHARP DM-2000 Series PCL6

● PCL5e Printer Driver: SHARP DM-2000 Series PCL5e
Note: It is recommended that you install the PCL6 printer driver.

If you have a problem printing from older software using
the PCL6 driver,remove it and install the PCL5e driver.

DM-2000

5  –  6