Read Sharp DM-2000 (serv.man5) Service Manual online
9) Set the printer name.
<1> If you want to change the printer name, enter a new name
in the space provided.
<2> If the program displays, “Do you want your Windows-based
programs to use this printer as the default printer?”, check
“Yes”.
“Yes”.
<3> Click the [Next] button.
10) Make the appropriate settings for your environment.
● When using print sharing, choose “Shared” and enter a share
name. If necessary for your environment, select Windows 95
from the list of operating systems.
from the list of operating systems.
● If you are not using shared printing, choose “Not shared”.
After making the settings on this screen, click the [Next] button.
11) Print a test page by clicking the [Finish] button.
Note: If you check “No” and click the [Finish] button, the printer
does not print a test page after the installation.
● The printer driver installation begins.
12) When the test page is printed properly, click the [Yes] button.
● The printer is ready for printing.
E. Changing Printer Configuration Settings
After installing the printer driver use the procedure in this section to
change the printer configuration settings. Also refer to the print driver
help for more information.
change the printer configuration settings. Also refer to the print driver
help for more information.
1. Click the Start menu, point to “Settings”, and choose “Printers”.
2. Right-click the appropriate printer and choose “Properties” from-
2. Right-click the appropriate printer and choose “Properties” from-
the menu.
3. Click the Configuration tab and change the printer settings.
7. Expansion memory installation
Memory expansion realizes the following effects.
● Increased processing speed of outline fonts or complex graphic data.
● Increased processing speed of outline fonts or complex graphic data.
● Shorter release time from a printing job of the computer.
● Allows high resolution printing.
● Complex data can be printed without data loss error or memory full
error.
Extend the pawls, insert an expansion memory, and engage the pawls
with the notches.
with the notches.
8. Print server card installation
Remove the dummy cover, insert the print server card into the connec-
tor of the printer PWB and fix it with the screw of the dummy cover. At
that time, cut off the notched section in the rear cabinet with nippers.
(Use nippers so that the cut surface is flat.)
tor of the printer PWB and fix it with the screw of the dummy cover. At
that time, cut off the notched section in the rear cabinet with nippers.
(Use nippers so that the cut surface is flat.)
Dummy cover
DM-2000
5 – 7
Click on the first or last page to see other DM-2000 (serv.man5) service manuals if exist.