DM-2000 (serv.man5). DM2000 Service Manual-Unpacking Installation Adjustments - Sharp Copying Equipment Service Manual (repair manual). Page 5

● If the “Update Device Driver Wizard” window appears, click the

[Next] button and proceed to step 2).

● If the “New Hardware Found” window appears, perform the fol-

lowing steps:

<1> Choose  “Driver from disk provided by hardware manufac-

turer” and click the [OK] button.

<2> When the “Install From Disk” window appears, insert the

SHARP Software CD-ROM into the CD-ROM drive, type
R:\English\WinXX and click the [OK] button.

<3> Choose the appropriate printer driver from those listed below

and click the [OK] button.

● PCL6 Printer Driver:SHARP DM-2000 Series PCL6

● PCL5e Printer Driver:SHARP DM-2000 Series PCL5e
Note: It is recommended that you install the PCL6 printer driver.

If you have a problem printing from older software using
the PCL6 driver,remove it and install the PCL5e driver.

<4> Proceed to step 5).

2) Search for the printer driver by clicking [Other Locations...] button.
3) Insert the SHARP Software CD-ROM into the CD-ROM drive, type

R:\English\WinXX and click the [OK] button.

4) After Windows finds the printer driver, click the [Finish] button to

continue the installation.
Note: In this step the PCL6 printer driver is installed automat-

ically. If you want to install the PCL5e printer driver, refer
to “Installing onto Windows 95/98 without Using the Plug &
Play Function”.

5) Set the printer name.

<1> If you want to change the printer name, enter a new name

in the space provided.

<2> If the program displays, “Do you want your Windows-based

programs to use this printer as the default printer?”, check
“Yes”.

<3> Click the [Next] button.

6) Print a test page by clicking the [Finish] button.

Note: If you check “No” and click the [Finish] button, the printer

does not print a test page after the installation.

● The printer driver installation begins.

● If the “Insert Disk” window appears, perform the following steps:
<1> Click the [OK] button.
<2> When the “Copying Files” window appears, type

R:\English\WinXX and click the [OK] button.

7) When the test page is printed properly, click the [Yes] button.

● The printer is ready for printing.

This printer is compatible with plug & play. If your computer is incom-
patible with plug & play or if you want to use this printer as a network
printer, refer to “Installing onto Windows 95/98 without Using the Plug
& Play Function”.

1) Turn the computer on and start Windows 98.

● The  “Add New Hardware Wizard” window appears automat-

ically, click the [Next] button.

Note: If the “Add New Hardware Wizard” window does not ap-

pear in this step, refer to “Installing onto Windows 95/98
without Using the Plug& Play Function”.

2) Display a list of all the printer drivers by checking “Display a list

of all the drivers in a specific location, ...” and clicking the [Next]
button.

DM-2000

5  –  4