AR-SP3 (serv.man2). ARSP3-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 13

9) The installation program will start. To select a different folder, select

Browse and type in the path and folder name where the printer
driver will be installed. Click OK and say YES to create the folder,
select the Next button to continue. To install the printer driver to the
default folder, click the Next button.

10) On the display you will see “printer port to be used”. The printer

port is selected automatically. If you are using the parallel inter-
face, this is LPT1. If you are using the USB interface, this is
LPT/USB1. Ensure that Yes is checked to use the printer as the
default printer. Finally click the Next button.

11) A  “Confirm installation” window will be displayed. To continue in-

stallation, click the Yes button.

12) When the installation is complete, you will be asked whether or not

to print a test page. If you wish to do so, click the Yes button. At
this time, ensure that paper is loaded in the paper tray.

13) If the test print completes successfully, click the Finish button.

“The installation of the SHARP AR-150 Series Software is com-
plete.” window will be displayed. Click the OK button.

c. Windows 3.1x:
With both the computer and the printer turned off, connect the printer
to the computer with a parallel interface cable.

1) Load paper into the paper tray of the printer. For instructions on

loading paper, see the section LOADING COPY PAPER in the
copier operation manual.

2) Turn on the printer and then start Windows on your computer.

3) Insert the installation CD-ROM into a CD-ROM drive.

4) Choose File from the Menu bar in Program Manager, and then

choose the Run... command.

5) Type R:\SETUP (if the CD-ROM is designated as drive R) in the

command line box and then click the OK button.

6) Select a directory to which the printer driver will be installed and

click the Next button. To install it to the default directory, click the
Next button.

7) A “printer port to be used” window will be displayed. Normally, LPT1

is automatically set.
Then ensure that Yes is checked to use this printer as the default
printer.

8) A  “Confirm installation” window will be displayed. To continue in-

stallation, click Yes.

9) When the installation is complete, restart Windows.

When the printer driver is installed, the SHARP AR-150 Series printer
driver group will be created. This group of software programs provides
the following functions:

a. Uninstall AR-150 Series
The printer driver can be uninstalled. If the driver is uninstalled, printing
can no longer be performed on the printer.
For proper uninstallation, be sure to use the SHARP uninstall program
of the printer driver group.

Readme
The latest information on the printer driver is included in this document.
Read the Readme first.

Advanced Settings
See help for Advanced Settings.

Status Monitor
The Status Monitor window provides visual information about the
printer state and current job.

DOS Emulation Setup

Status Monitor HELP
Assistance and information for Status Monitor.

DOS Emulation HELP
Assistance and information for DOS Emulation support.

Advanced Settings HELP
Assistance and information for Advanced Settings.

AR-SP3

2  – 11