AR-SP3 (serv.man2). ARSP3-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 12

Read Sharp AR-SP3 (serv.man2) Service Manual online

 6) “Install from Disk” window will appear. Insert the installation CD-
ROM into the CD-ROM drive. Type R:\ (if the CD-ROM is desig-
nated as drive R) and click the OK button. Proceed to step 7.
  7) The installation program will start. To install the printer driver to
the default folder, click the Next button. To select a different folder,
select Browse or type in the new path and folder name. Click OK
and say YES to create the folder, select the Next button to con-
tinue.
  8) On the display, you will see “printer port to be used”. Normally, this
is LPT1 and it is selected automatically.
Ensure that Yes is checked to use the printer as the default
printer.
Finally click the Next button.
 9) A “Confirm installation” window will be displayed. To continue in-
stallation, click the Yes button.
10) When the installation is complete, you will be asked whether or not
to print a test page. If you wish to do so, click the Yes button. At
this time, ensure that paper is loaded in the paper tray.
11) If the test print completes successfully, click the Finish button.
“The installation of the SHARP AR-150 Series Software is com-
plete.” window will be displayed. Click the OK button.
b. Windows 98:
With both the computer and the printer turned off, connect the printer
to the computer with either a parallel or a USB interface cable.
1) Load paper into the paper tray of the printer. For instructions on
loading paper, see the section LOADING COPY PAPER found in
the copier operation manual.
2) Turn on the printer.
3) Turn on your computer and start Windows.
When using the USB interface:
Connect your personal computer and the printer using a USB in-
terface cable if you have not already done so.
When the “Add New Hardware Wizard” window appears, insert
the installation CD-ROM, click the Next button, follow the on-
screen instructions, and finally click the Finish button.
4) When using Windows 98 on a personal computer with plug & play*,
the “Add New Hardware Wizard” window will appear. Click the Next
button and follow the on-screen instructions.
If the “Add New Hardware Wizard” window does not appear,
proceed to step 8.
∗ Plug &play: For plug & play information
5) Select Search for the best driver for your device and click the Next
button.
6) Insert the installation CD-ROM into the CD-ROM drive. (If you are
using the USB interface, confirm that the installation CD-ROM is in
the CD-ROM drive.) Select the CD-ROM drive and click the Next
button.
7) Windows driver file search will find the device “SHARP AR-150
Series”. Click the Next button. Proceed to step 9.
8) Insert the installation CD-ROM into the CD-ROM drive. (If you are
using the USB interface, confirm that the installation CD-ROM is in
the CD-ROM drive.) Click the Start button and select Run. When
the window shown below appears, type R:\SETUP (if the CD-ROM
is designated as drive R) and click the OK button. Proceed to step
9.
AR-SP3
2  – 10
Page of 47
Display

Click on the first or last page to see other AR-SP3 (serv.man2) service manuals if exist.