Read Sharp AR-PE2 (serv.man6) Service Manual online
4-7
4
Printing the Test Page
Printing the Test Page
If the Test Page does not print at all or has a low-quality image, the Fiery AR-PE2 board
or the video interface connection may be faulty or the copier may not be functioning
properly.
or the video interface connection may be faulty or the copier may not be functioning
properly.
T
O
PRINT
THE
T
EST
P
AGE
1.
Power on the copier and allow it to warm up.
2.
At the Info screen, press the Menu button once to display the Functions menu.
3.
Select Print Pages, then Test Page.
The Fiery AR-PE2 sends the Test Page to the copier and displays the RIP and Print status
screens so you can monitor the job.
screens so you can monitor the job.
4.
Examine the quality of the Test Page.
If the Test Page prints, you know that the Fiery AR-PE2 print engine is functional and
that the connection between the Fiery AR-PE2 and the copier is good. When you
examine the Test Page, keep in mind that:
that the connection between the Fiery AR-PE2 and the copier is good. When you
examine the Test Page, keep in mind that:
• All color patches should be visible, even though they may be very faint in the 5% and
2% range.
• Each color’s patch set should show uniform gradation from patch to patch as the color
lightens from 100% to 0%.
Poor image quality may indicate a need to calibrate the system or service the copier.
Information on the Test Page includes the date and time of the last calibration, so the Test
Page can be used for future reference. For more information, see the user documentation
set.
Information on the Test Page includes the date and time of the last calibration, so the Test
Page can be used for future reference. For more information, see the user documentation
set.
Click on the first or last page to see other AR-PE2 (serv.man6) service manuals if exist.