AR-PB2A (serv.man10). Commands for selection of paper input and output trays. Including Escape codes, PJL commands and Postscript commands. - Sharp Copying Equipment FAQ (repair manual). Page 2

Read Sharp AR-PB2A (serv.man10) FAQ online

PJL Paper Output Selection Commands
@PJL SET OUTTRAY=TRAY1
@PJL SET OUTTRAY=TRAY2
note: Tray 2 is offset tray for FN2
@PJL SET OUTTRAY=TRAY3
note: Tray 3 is offset tray for FN1
Other PJL Commands
@PJL SET RET=ON
select edge enhancement ON/OFF.
Default ON
@PJL SET JOBSTAPLE=STAPLELEFT
select stapling, only available with
finisher option fitted.
STAPLELEFT/STAPLEBOTH
@PJL SET RESOLUTION=600
300/600.  Default 600
@PJL SET JOBBOOKLET=OFF
select pamphlet mode, ON/OFF.
@PJL SET ORIENTATION=PORTRAIT PORTRAIT/LANDSCAPE
@PJL SET DUPLEX=ON
select duplex ON/OFF.  Default OFF
@PJL SET JOBORDER=ORDERNTO1
select print order, Nto1 best for face up
output, 1toN for face down
@PJL SET OUTFACEMODE=FACEUP
FACEUP/FACEDOWN, face down only
available with finisher.
Default FACEUP
@PJL SET TANDEM=OFF
select tandem mode job ON/OFF
@PJL ENTER LANGUAGE=PCL
set language, forces interpreter into one
mode.  Stops problems of non
recognition of job language type.
PCL/PCLXL/POSTSCRIPT
Standard PCL Commands
Esc&l0S
Simplex
Esc&l1S
Duplex, long edge binding
Esc&l2S
Duplex, short edge binding
Page of 2
Display

Download Sharp AR-PB2A (serv.man10) FAQ