AR-P15 (serv.man10). ARP15-004 Installation of the ARP15 on a Windows 9x Peer to Peer network. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Sharp Electronics (UK) Ltd., NIS Systems Support 

 

NIS Bulletin 071 

 

Page:  3 of 13 

 
Before the AR-P15 can be installed onto the network, the AR-P15 must have a valid IP address and subnet 
mask.  
 
Complete the following steps to set the IP address from the Sharp Digital Copier LCD panel 
 
On the Control Panel of the AR651/810 copier, press the Printer/Network  key. The Print or Print/Scan menu is 
displayed. 

 
Press the On/Off menu on the Touch Screen and take the controller Offline.  Enter the Setting menu and press 
Admin. 

 
Enter the “Admin” password. 

Note: When you set-up the AR-P15 for the first time, an “Admin” password is not set.