Read Sharp AR-NC3D (serv.man16) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 050.doc
Page: 3 of 3
2. To apply these settings, enter the NIC password. The default password is "sysadm" in lowercase,
but that may have been changed. Then click on the Apply button.
Note:
Once the table of authorised IP addresses is set, only the listed sources will have access to
the printer and set-up HTML pages. So ensure that one of the listed IP addresses is that of
the network administrator who is responsible for administering this print device.
the printer and set-up HTML pages. So ensure that one of the listed IP addresses is that of
the network administrator who is responsible for administering this print device.
3. Power cycle the copier to enable the NIC to restrict the access to those addresses listed.
4. The Reset button will clear all the entries on the screen. To clear all the entries on the NIC, click
on the Reset button, enter the NIC password and then click on the Apply button. This will have
the effect of disabling the function.
the effect of disabling the function.
5. The Network Security Feature may also be disabled by performing a reset to factory default on
the NIC.
