Read Sharp AR-NC3D (serv.man14) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 1 of 17
Installation under a Windows 2000
Network
Model Name:
ARNC1D/3D
Pre-requisites:
IP Address assigned to the ARNC1D/3D network card. Microsoft
Windows 2000 CD. Sharp ARPB2/+ NT4 Printer Drivers (Version 3
Drivers only).
Windows 2000 CD. Sharp ARPB2/+ NT4 Printer Drivers (Version 3
Drivers only).
Note:
It may be necessary to use the Microsoft Windows 2000 CD during
installation.
Items in italics indicate icons, buttons or menu options during
installation.
It may be necessary to use the Microsoft Windows 2000 CD during
installation.
Items in italics indicate icons, buttons or menu options during
installation.
Procedure:
1. Start Windows 2000.
2. From
2. From
the
Start menu go to Settings and then Printers.
3. In
the
Printers dialog box, double-click on Add Printer.
Date:
20
th
January 2001
Model:
ARNC1D/3D
Ref: 009a
Colour Code:
Colour Code:
Orange (C)
Page:
1 of 17
NIS SYSTEMS SUPPORT
BULLETIN
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 2 of 17
4.
The welcome screen will appear, click the Next button.
5.
If you are going to print to the copier using a parallel cable or the TCP/IP protocol,
select Local Printer and click Next.
select Local Printer and click Next.
6.
The Wizard will now request the communications port:
NOTE:
LPT1 through LPT3 are local parallel ports. COM1 through COM4 are local serial ports.
LPT1 would be chosen if the ARPB2 was connected directly to this workstation with a
parallel cable.
LPT1 through LPT3 are local parallel ports. COM1 through COM4 are local serial ports.
LPT1 would be chosen if the ARPB2 was connected directly to this workstation with a
parallel cable.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 3 of 17
7.
Select Create a new port and in the Type field, select the option for Standard TCP/IP
Port. Click Next.
Port. Click Next.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 4 of 17
8.
Make sure that the Sharp copier is powered on and connected to the network. Click
Next
Next
9.
Use the following steps to check / set an IP address and subnet address on the
ARNC1D/3D network interface card.
ARNC1D/3D network interface card.
With the AR-PB2/+ and the ARNC1D/3D installed in the copier, press the following
keys on the copiers operation panel, in the order shown.
keys on the copiers operation panel, in the order shown.
PRINT -> OFFLINE-> MENU-> NETWORK-> SETTING-> IP ADDRESS SETTING
Use the keypad to enter the four octets in the IP address and Subnet Mask. A
Gateway addresses may also be required in a larger scale network. Hit OK three
times when done to return to the main menu.