AR-M550 (serv.man15). (8) Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 92

AR-M550/M620  SIMULATION  8 - 92

1) Enter the DTMF signal (1 - 9, 0, *, #) to be sent with 10-key.

2) Press [START] key.

The signal is sent in the max. send level. 

When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.

1) Enter the DTMF signal (1 - 9, 0, *, #) to be sent with 10-key.

2) Press [START] key.

The signal is sent in the send level set with the soft SW. 

When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.

1) Select YES/NO of data transfer (backup). 

2) Press [START] key.

This function is valid only when the AR-MM9 is installed. (Used only
when it is required to backup the FAX PWB SRAM data for repairing
the FAX PWB.)

Backup contents

The other contents are not backed up.

Select 0 and press [START] key.

Press [CUSTOM SETTINGS] key.

66-17

Setting

Used to check the dial signal (DTMF) output in the FAX 
tone dial mode.  Send level: Max. Used to check the 
operation. (Only when FAX is installed)

FAX

Operation

Press [START] key.

Press [CUSTOM SETTINGS] key.

SIMULATION 66-16

DIAL TEST(DTMF). SELECT 0-2, AND PRESS START.

0. EXECUTE

1. HIGH  

7

 (dB)  2. HIGH-LOW  

7

SIMULATION 66-16

DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.

1. HIGH(dB)

1

7

Press [CUSTOM SETTINGS] key 
or press [START] key.

Select 1 or 2, and 

press [START] key. 

(When 1)

SIMULATION 66-16

DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.

1. HIGH(dB)

7

(When 2)

SIMULATION 66-16

DIAL TEST(DTMF).  EXECUTING···.

1. HIGH  

7

 (dB)  2. HIGH-LOW  

7

SIMULATION 66-17

DTMF SIGNAL OUTPUT.(LEVEL MAX)  INPUT 0-9, *, #, AND

PRESS START.

1

SIMULATION 66-17

DTMF SIGNAL OUTPUT.(LEVEL MAX)  EXECUTING···.

1

66-18

Setting

Used to check the dial signal (DTMF) output in the FAX 
tone dial mode.  An output is sent at the send level set 
by the soft switch. Used to check the operation. (Only 
when FAX is installed)

FAX

Operation

Press [START] key.

Press [CUSTOM SETTINGS] key.

66-19

Data transfer

Used to back-up the HDD data into the Flash memory 
(optional FAX expansion memory: AR-MM9). (Only 
when FAX is installed)

FAX

Data

1

YES

Backup is executed.

2

NO

Backup is not executed.

• Address book data (FAX, Mail, Address)
• One-touch dial

• Item name

• FTP expansion

• Fine name

• Group expansion

• FAX receive select table

• Program

• IFAX receive YES/NO

• Use index

• Polling allow number

• Standard sender

• Memory box

• IFAX sender registration 

• Sender name

• FAX sender registration

• Soft SW

SIMULATION 66-18

DTMF SIGNAL OUTPUT.(SOFT SW.)  INPUT 0-9, *, #, AND PRESS

START.

1

SIMULATION 66-18

DTMF SIGNAL OUTPUT.(SOFT SW.)  EXECUTING···.

1