AR-M550 (serv.man15). (8) Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 98

Read Sharp AR-M550 (serv.man15) Service Manual online

AR-M550/M620  SIMULATION  8 - 98
Operation/Procedure
1) Enter the number corresponding to the select IN signal YES/NO
setting with 10-key.
2) Press [START] key.
When the printer parallel I/F is used and a trouble is generated in the
communication between the PC and the printer, change the setting of
this simulation.
Operation/Procedure
During check, "CHECKING" is displayed. When check is completed
normally, "OK" is displayed. In case of an error, "NG" is displayed.
(Display message)
lWith READY displayed, 
press [START] key.
Press [CUSTOM SETTINGS] key.
67-11
Purpose
Setting
Function
(Purpose)
Used to set YES/NO of the parallel I/F select signal of 
the printer.
Section
MFP controller
Item
Operation
Interface/Communication
Item
Default
0
OFF
1
1
ON
67-16
Purpose
Operation test/Check
Function
(Purpose)
Used to check the operation of the network card.
Section
MFP controller
Item
Operation
Interface/Communication
CHECKING
Checking
OK
Check end (Normal)
NG
Check end (Error)
Check end
Press [CUSTOM SETTINGS] key.
SIMULATION 67-2
CENTRO PORT CHECK.
CENTRO PORT: 
READY
SIMULATION 67-2
CENTRO PORT CHECK.
CENTRO PORT:    
OK
 (or 
STAGE7 NG
)
SIMULATION 67-11
CENTRO SELECT IN SIGNAL SETTING. SELECT 0-1, AND PRESS
START.
0. OFF
1. ON
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: CHECKING
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: OK (or NG)
Page of 98
Display

Download Sharp AR-M550 (serv.man15) Service Manual (Repair Manual)