AR-M550 (serv.man15). (8) Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 90

AR-M550/M620  SIMULATION  8 - 90

1) Select the number corresponding to the output mode with 10-key.

2) Press [START] key.

The signal is sent in the max. send level.

When the number is entered during execution, the kind of signal can
be changed.

When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.

1) Select the number corresponding to the output mode with 10-key.

2) Press [START] key.

The signal is sent in the send level set with the soft switch.

When the number is entered during execution, the kind of signal can
be changed.

When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.

1) Enter the dial number with 10-key.

Use 10-key, [*] key, and [#] key to enter the number. The upper
limit is 20 digits.

When [CLEAR] key is pressed, the mode returns to the initial state.

2) Press [START] key.

1) Enter 0 with 10-key.

2) Press [START] key. 

The dial signal is outputted.

(Dial pulse make time setting)

1) Enter 1 with 10-key.

2) Press [START] key.

66-11

Operation test/Check

Used to check the output operation of FAX G3 mode 
300bps. (Used to check the operation of MODEM.) 
Send level: Max. (Only when FAX is installed)

FAX

Operation

1

NO SIGNAL

No signal

4

00000

00000

2

11111

11111

5

010101

010101

3

11110

11110

6

00001

00001

Same display 

Select 3 and press [START] key.

66-12

Operation test/Check

Used to check the output operation of FAX G3 mode 
300bps. (Used to check the operation of MODEM.) An 
output is send at the send level set by the soft switch. 
(Only when FAX is installed)

FAX

Operation

1

NO SIGNAL

No signal 

4

00000

00000

2

11111

11111

5

010101

010101

3

11110

11110

6

00001

00001

SIMULATION 66-11

300bps SIGNAL OUTPUT.(LEVEL MAX)  SELECT 1-6, AND PRESS

START.

1. NO SIGNAL  2. 11111  3. 11110  4. 00000

5. 010101     6. 00001

SIMULATION 66-11

300bps SIGNAL OUTPUT.(LEVEL MAX)  SELECT 1-6, AND PRESS

START.

EXECUTING···.

1. NO SIGNAL  2. 11111  3. 11110  4. 00000

5. 010101     6. 00001

1

1

Press [START] key. 

Press [CUSTOM SETTINGS] key

SIMULATION 66-11

300bps SIGNAL OUTPUT.(LEVEL MAX)  SELECT 1-6, AND PRESS

START.

EXECUTING···.

1. NO SIGNAL  2. 11111  3. 11110  4. 00000

5. 010101     6. 00001

3

Press [CUSTOM SETTINGS] key.

Same display

Select 3 and press [START] key.

66-13

Setting

Used to enter (set) the number of FAX dial signal 
output test. (The dial number set by this simulation is 
outputted when the dial signal output test is made by 
SIM 66-14  - 16. ) (Only when FAX is installed)

FAX

Data

66-14

Setting/Operation test/Check

Used to set the make time in the FAX pulse dial mode 
(10pps) and to test the dial signal output. (The dial 
number signal set by SIM 66-13 is outputted.) Used to 
check troubles in dialing and to check the operation. 
(Only when FAX is installed)

FAX

Operation

SIMULATION 66-12

300bps SIGNAL OUTPUT.(SOFT SW.)  SELECT 1-6, AND PRESS

START.

1. NO SIGNAL  2. 11111  3. 11110  4. 00000

5. 010101     6. 00001

SIMULATION 66-12

300bps SIGNAL OUTPUT.(SOFT SW.)  SELECT 1-6, AND PRESS

START.

EXECUTING···.

1. NO SIGNAL  2. 11111  3. 11110  4. 00000

5. 010101     6. 00001

1

1

Press [START] key.

Press [CUSTOM SETTING] key.

SIMULATION 66-12

300bps SIGNAL OUTPUT.(SOFT SW.)  SELECT 1-6, AND PRESS

START.

EXECUTING···.

1. NO SIGNAL  2. 11111  3. 11110  4. 00000

5. 010101     6. 00001

2

Press [CUSTOM SETTINGS] key.

SIMULATION 66-13

DIAL TEST NUMBER SETTING.      0-9:[0-9], *:[*], #:[#]

INPUT NUMBER AND PRESS START.

0123456789*#01234567