Read Sharp AR-FN2 (serv.man7) Service Manual online
[8] ADJUSTMENTS
1. De-curler roller gap adjustment
Adjustment procedures
1) Remove the paper entry guide 1) and paper entry guide lever 2).
2) Push the adjustment plate 3) fully to the end of the adjustment
margin in the arrow direction, and fix it with screw 4).
There are two adjustment positions for adjustment plate 3). Adjust
in the same manner. As a result, decolor roller 5) and roller shaft
6) are bent in 2.0mm.
in the same manner. As a result, decolor roller 5) and roller shaft
6) are bent in 2.0mm.
(Note) When replacing de-curler roller 5) and roller shaft 6), be sure
to perform the above adjustment in advance.
Roller pushing amount: 0mm
Roller pushing amount: 1mm
Roller pushing amount: 2mm
(6)
(5)
(1)
(2)
(3)
(4)
8 – 1
