Read Sharp AR-FN2 (serv.man22) Technical Bulletin online
SUK GENERATED
Sharp Electronics (UK) Ltd., Technical Services Group
The Lower Flapper Stopper Arm Pad is not flush with the end of the stopper. Over a
period of time it moves into the finisher therefore, leaving a small amount of adhesive
exposed. Due to the amount of play in the back-to-front movement of the Flapper, the
Flapper Arm may come into contact with this adhesive. The timing of the Flapper
movement is then delayed and the above symptoms are caused.
period of time it moves into the finisher therefore, leaving a small amount of adhesive
exposed. Due to the amount of play in the back-to-front movement of the Flapper, the
Flapper Arm may come into contact with this adhesive. The timing of the Flapper
movement is then delayed and the above symptoms are caused.
To prevent this problem in the short term, please remove the Lower Stopper Pads on the
K-Frames F&R and remove all signs of adhesive.
K-Frames F&R and remove all signs of adhesive.
A long-term fix will be the addition of a new Lower Stopper Pad. Details regarding Part
Numbers for these items will be issued by Fast Facts in the near future. These new pads
will be available free of charge.
Numbers for these items will be issued by Fast Facts in the near future. These new pads
will be available free of charge.
Display
