Read Sharp AR-F13 (serv.man2) Service Manual online
AR-F13 UNPACKING AND INSTALLATION 3-8
<4> Reattach the jam handling dial and close the front cover.
9) Reattach the front cover to the right front of the finisher.
<1> Attach the front cover using the screws A and B (two for
each).
10) Paste the dust box label to the top cover.
<1> Paste the supplied dust box label to the location indicated in
the illustration.
11) Connect the connector to the stand/paper drawer.
Connect the connector of the relay harness of the finisher to the
stand/paper drawer and tighten the screws of the connector.
stand/paper drawer and tighten the screws of the connector.
12) Paste the label.
Paste the label to the position shown in the illustration.
On completion of the installation of the AR-F13 finisher, please change
the default output tray of the machine to the top tray of the finisher.
the default output tray of the machine to the top tray of the finisher.
Screws B
Screws A
Front cover
Screws
Connector
X
Y
For RADF
STP label
Punch label
Y
X
STP label
For Scanner
Punch label
Click on the first or last page to see other AR-F13 (serv.man2) service manuals if exist.