Read Sharp AR-CS1 Service Manual online
C. AR-CS1
Remove the power plug of the copier from the power
outlet and perform the following procedure.
outlet and perform the following procedure.
1. Remove the rear cabinet of the desk.
Remove the fixing screws (6 pcs.) of the rear cabinet of the desk, and
remove the rear cabinet.
remove the rear cabinet.
2. Install the lift up unit.
Remove the fixing screw (section
★
) of the desk PWB mounting
plate, and open the desk PWB mounting plate.
Attach the lift up unit to the rear frame of the desk and slide it to the
left.
left.
Fix the lift up unit with the fixing screws A (3 pcs.) and connect the
desk PWB connector to the lift up unit connector.
desk PWB connector to the lift up unit connector.
Return the desk PWB mounting plate to the original position, and fix it
with the fixing screw (section
with the fixing screw (section
★
).
3. Install the rear cabinet of the desk.
Install the rear cabinet which was removed in procedure 1 to the
original position, and fix it with fixing screws (6 pcs.).
original position, and fix it with fixing screws (6 pcs.).
4. Remove the desk tray.
Pull out the tray (which is above the tray to be installed) until it stops.
Hold the both sides of the tray and lift it to remove.
5. Remove the cover.
Remove the fixing screws (2 pcs.) of the cover of the tray to be
installed, and remove the cover.
installed, and remove the cover.
Packed items
Tray rail left
(1 pc.)
Paper fed unit
(1 pc.)
Lift up unit
(1 pc.)
Tray rail right cover
(1 pc.)
Stopper left
(1 pc.)
Stopper right
(1 pc.)
Fixing screw A
(M4 x 10) (7 pcs.)
Fixing screw B
(M4 x 16) (1 (pc.)
Fixing screw (6 pcs.)
Rear cabinet
Desk PWB mounting
plate
plate
Desk mounting
plate fixing screw
plate fixing screw
Fixing screw A
Desk PWB connector
Fixing screw A
Lift up unit
Fixing screw (6 pcs.)
Rear cabinet
Fixing screw
Cover
Fixing screw
3 – 5
Click on the first or last page to see other AR-CS1 service manuals if exist.