Read Sharp AR-CS1 Service Manual online
2. Put the copier on the desk.
Hold the four knobs of the copier, fit the four tabs of the copier with
the four holes of the desk, and place the copier on the desk.
the four holes of the desk, and place the copier on the desk.
3. Remove the lower tray of the copier.
Remove the lower tray of the copier as shown.
4. Connect the copier and the desk.
Open the desk front cover.
Install the connecting plate large to the connecting plate installing
position with the four connecting plate fixing screws to fix the copier
and the desk.
position with the four connecting plate fixing screws to fix the copier
and the desk.
Then cut off the notch sections (at right and left of the copier) in the
connecting plate installing section.
connecting plate installing section.
Install the connecting plate small to the position shown in the figure
below with the connecting plate fixing screws (2 pcs. for each) to fix
the copier and the desk.
below with the connecting plate fixing screws (2 pcs. for each) to fix
the copier and the desk.
5. Install the lower tray of the copier.
Install the lower tray of the copier as shown.
6. Fix the desk to the floor.
Turn the nut of the adjuster which is in the lower section of the desk
with a wrench or nippers in the direction of arrow, and adjust and fix
the desk on the floor.
with a wrench or nippers in the direction of arrow, and adjust and fix
the desk on the floor.
Notch
Fixing
screw
screw
Connecting
plate small
plate small
Front cover
Fixing
screw
screw
Connecting
plate large
plate large
Connecting
plate small
plate small
Fixing screw
Notch
Nut
Adjuster
3 – 2
Click on the first or last page to see other AR-CS1 service manuals if exist.