Read Sharp AR-CS1 Service Manual online
B. AR-DE1
Packed items
Remove the power plug of the copier from the power
outlet, then perform the following procedures.
outlet, then perform the following procedures.
1. Put the copier on the desk.
Hold the knobs of the copier and fit the desk precisely with the desk
and put the copier on the desk.
and put the copier on the desk.
Be sure to check that the positioning pins (2 pcs.) of the desk (top
front) are securely in the positioning holes.
front) are securely in the positioning holes.
Be careful that the copier and the bottom are not in contact with the
desk paper guide.
desk paper guide.
2. Remove the tray from the copier.
Pull the lower tray out until it stops.
Then hold and lift the tray to remove.
3. Connect the copier and the desk.
•
Front connection
Put the connecting plate of the desk as shown, and fix the copier
and the desk with the connecting screws (2 pcs.).
and the desk with the connecting screws (2 pcs.).
Front
Connecting plate (2 pcs.)
Connecting plate cover (2 pcs.)
Connecting screw (6 pcs.)
Portioning pins
Paper guide
Connecting plates
Connecting
screws
screws
3 – 3
Click on the first or last page to see other AR-CS1 service manuals if exist.