AR-CS1. ARCS1-Service Manual - Sharp Copying Equipment Service Manual (repair manual)

ar-cs1 service manual
Model
AR-CS1
Pages
26
Size
1.38 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / ARCS1-Service Manual
File
ar-cs1.pdf
Date

Read Sharp AR-CS1 Service Manual online

SERVICE MANUAL
CODE: 00ZARDE2//A1E
DIGITAL COPIER 
OPTIONS
AR-DD1
 
 
Desk
  
 
AR-DE1
 
 
1-step paper
feed desk
  
 
MODEL
AR-CS1
 
 
Paper feed
module
  
 
SHARP CORPORATION
Parts marked with "
!
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
[ 1 ] PRODUCT OUTLINE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 2 ] SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 3 ] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 4 ] EXTERNAL VIEW AND INTERNAL STRUCTURE  . . . . . . . . . . 4-1
[ 5 ] DISASSEMBLY AND ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . 5-1
[ 6 ] ADJUSTMENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[ 7 ] MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[ 8 ] TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[ 9 ] ELECTRICAL SECTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
CONTENTS
AR-DE1
AR-DD1
AR-CS1
[1] PRODUCT OUTLINE
The AR-DD1 is the exclusive-use desk for a copier body, which
stores copy paper.
The AR-DD1 (1-step paper feed desk) serve as the paper feed unit
which also serves as a desk for a copier.
The AR-DE1 is composed of the paper feed/transport section, the
lift-up section, and the paper feed tray section. By installing the AR-
DE1 to a copier, the additional paper feed tray is available as shown
below;
Installation of the paper feed module (AR-CS1) to the AR-DE1 adds
one more paper feed tray.
[2] SPECIFICATIONS
 1. Model:
AR-DD1
Desk
AR-DE1
Desk-type paper feed unit
  2. No. of steps of paper feed:
AR-DE1
1-step (2-step with the AR-CS1 installed)
 3. Paper size:
A3/B4/A4R/B5R/A4/B5
(11" 
×
 17"/8.5" 
×
 13"/8.5" 
×
 11"/8.5" 
×
 11R)
 4. Paper weight:
56 
 105g/m
2
 5. Paper capacity:
Each tray 500 sheets (Paper weight 80g/m
2
)
 6. Paper set:
Center reference, tray size when shipping A3
  7. Paper supply system:
Front loading system. Supplied at the top.
  8. Paper feed system:
Paper pickup system by the takeup roller, torque limiter
separation system
  9. Paper transport speed:
170mm/s 
 306mm/s (The speed depends on the
communication command from the copier body.)
10. Paper feed speed:
33 sheets/min
11. Tray falling/rising time (AR-DE1):
Within 8 sec (at min. number of set paper)
12. Power:
5V and 24V supplied from the copier.
13. Weight:
AR-DE1 25kg (excluding paper)
14. Drive form:
Drive motor (The DC brushless motor and the control PWB
are included in the desk.)
15. Operation control system:
Controlled by the communication command from the copier.
16. Paper transport path:
Paper entry from the lower section of the copier.
17. Dehumidifying heater:
Provided (power consumption 14W
18. External dimensions:
600(W) x 604(D) 
×
 403(H)mm
19. Power consumption:
24W (MAX) 4.5W (Ready condition)
[3] UNPACKING AND
INSTALLATION
1. UNPACKING
For unpacking, refer to the figure below.
A. AR-DD1
Copier body
[1-step paper feed desk]
AR-DE1
550-sheet tray
(Slot for AR-CS1)
550-sheet tray
AR-CS1
Paper feed module
AR-CS1 (Option)
1 – 1
B. AR-DE1
C. AR-CS1
2. Installing procedure
A. AR-DD1
1. Install the caster and the adjuster.
Put the desk as shown below, and install the casters (4 pcs.) and
adjusters (4 pcs.).
When installing the casters, use the caster fixing wrench packed
together.
Caster
(4 pcs.)
Connection
plate small
(2 pcs.)
Connection
plate large
 (1 pc.)
Connection plate
fixing screw
(8 pcs.)
Caster fixing wrench
(1 pc.)
Spring washer
(4 pcs.)
Adjuster / with cover
(3 pcs.)
Caster fixing wrench
Caster
Adjuster / with cover
 
 
 
Spring washer
3 – 1
2. Put the copier on the desk.
Hold the four knobs of the copier, fit the four tabs of the copier with
the four holes of the desk, and place the copier on the desk.
3. Remove the lower tray of the copier.
Remove the lower tray of the copier as shown.
4. Connect the copier and the desk.
Open the desk front cover.
Install the connecting plate large to the connecting plate installing
position with the four connecting plate fixing screws to fix the copier
and the desk.
Then cut off the notch sections (at right and left of the copier) in the
connecting plate installing section.
Install the connecting plate small to the position shown in the figure
below with the connecting plate fixing screws (2 pcs. for each) to fix
the copier and the desk.
5. Install the lower tray of the copier.
Install the lower tray of the copier as shown.
6. Fix the desk to the floor.
Turn the nut of the adjuster which is in the lower section of the desk
with a wrench or nippers in the direction of arrow, and adjust and fix
the desk on the floor.
Notch
Fixing
screw
Connecting
plate small
Front cover
Fixing
screw
Connecting
plate large
Connecting
plate small
Fixing screw
Notch
Nut
Adjuster
3 – 2
Page of 26
Display

Download Sharp AR-CS1 Service Manual (Repair Manual)

Here you can read online and download Sharp AR-CS1 Service Manual in PDF. AR-CS1 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-CS1 Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.