AR-C330 (serv.man5). ARC330-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 127

AR-C330  SIMULATION  8 - 6

27

1

Used to set the specifications for 
operations in case of communication 
trouble between the host computer and 
MODEM (machine side). (When 
communication trouble occurs between 
the host computer  MODEM and the 
machine, the self diag display  (U7-00) 
is printed and setting for inhibition of 
print or not is made.)

 Setting

Communication unit 
(TEL/LIU/MODEM etc.)

Specifications

Operation mode 
(Common)

2

Used to set or change the host 
computer/MODEM number. (This 
setting is required when a 
communication is made between the 
copier and the computer through 
MODEM.)

Setting

Communication unit 
(TEL/LIU/MODEM etc.)

Data

User data

3

Used to set and change the ID 
numbers of the copier, the host 
computer/MODEM. (This setting is 
required when a communication is 
made between the copier and the 
computer through MODEM.)

Setting

Communication unit 
(TEL/LIU/MODEM etc.)

Data

Communication

4

Used to enter the service start time and 
service end time for management of 
servicing. (The data can be checked 
with the host computer.)

Setting

Communication unit 
(TEL/LIU/MODEM etc.)

Data

Communication

5

Used to enter the machine TAG No. 
(This function allows to check the TAG 
No. of the machine with the host 
computer.)

Setting

Communication unit 
(TEL/LIU/MODEM etc.)

Data

User data

6

Used to set ON/OFF of service call 
sending to the service center by use of 
RIC when trouble occurred in the 
machine. (The service call is not sent 
automatically, but sent manually.)

Setting

Communication unit 
(TEL/LIU/MODEM etc.)

Specifications

Others

29

4

Setting

Memory

Counter

30

1

Used to check the operation of sensors 
and detectors in the paper feed, paper 
transport, paper exit sections and the 
related circuits.

Operation test/check

Operation

2

Used to check the operation of sensors 
and detectors in the paper feed section 
and the related circuits. (The operation 
of the paper feed sensors and 
detectors can be monitored with the 
LCD display.)

Operation test/check

Paper transport

Operation

33

1

Used to check the operation of the card 
reader and the sensors and the related 
circuits. (The card reader sensor 
operation can be monitored with the 
LCD display.)

Operation test/check

Others

Operation

40

1

Used to check the operation of the 
manual feed tray paper size detector 
and the related circuit. (The operation 
of the manual feed tray paper size 
detector can be monitored with the 
LCD display.)

 Operation test/check

Paper transport

 Operation

2

Used to adjust the manual feed tray 
paper width detector detection level.

Adjustment

Paper transport

Operation

4

Used to check the OHP sensor and its 
control circuit.

Operation test/check

Paper transport

Operation

5

Used to adjust the detection level of the 
OHP sensor.

Adjustment

Paper feed

Operation

6

Used to set the OHP sensor 
adjustment parameter.

Setting

Paper feed

Operation

41

1

Used to check the operation of the 
document size sensor and the related 
circuit. (The operation of the document 
size sensor can be monitored with the 
LCD display.)

Operation test/check/
Operation data Output/
Check (Display/Print)

Others

 Operation

2

Used to adjust the document size 
sensor detection level.

Adjustment

Others

Operation

3

Used to check the operation of the 
document size sensor and the related 
circuit. (The document size sensor 
output level can be monitored with the 
LCD display.)

Operation test/check

Others

 Operation

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub