AR-C330 (serv.man5). ARC330-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 126

AR-C330  SIMULATION  8 - 5

24

8

Used to clear the waste toner counter 
in the transfer section.

Data clear

Image process 
(Photoconductor/
Developing/Transfer/
Cleaning)

Copy

Counter

9

Printer/Other counter clear

Data clear

Printer

Counter

25

1

Used to check the operation of the main 
drive (excluding the scanner section) and 
the toner density sensor. (The toner 
density sensor output can be monitored.)

Operation test/check

Image process 
(Photoconductor/
Developing/Transfer/
Cleaning)

Developer/
Toner Hopper

Operation

2

Used to make the initial setup 
(automatic adjustment) of toner density 
when replacing developer.

Setting

Image process 
(Photoconductor/
Developing/Transfer/
Cleaning)

Developer/
Toner Hopper

26

1

Used to make option setup. (When 
installing an option,this simulation is 
used to setup for that option (software).

Setting

Specifications

Options

2

1) Used to set the paper size of the 

large capacity tray. (When the 
paper size is changed, the software 
setup must be changed 
accordingly with this simulation.)

2) Used to detect 8.5 x 13 (INCH 

Series) paper or documents and to 
set the display mode. (All paper 
feed modes)

3) Used to set the display form of the 

paper kind in the manual paper 
feed mode.

Setting

Paper transport

Specifications

3

Used to set the auditor specification 
mode. Setting must be made according 
to the use conditions of the auditor.

Setting

Auditor

Specifications

5

Used to set the count mode of the total 
counter, the developer counter, and the 
maintenance counter.

Setting

Specifications

Counter

6

1) Used to set the specifications 

(paper, fixed copy magnification 
ratio, machine operations in case 
of an image (process) correction 
error) according to the destination.

Setting

Specifications

Destination

18

Used to set YES/NO of toner save 
operation. (This simulation is valid only for 
Japan and UK versions. It depends on Sim 
26-6 (Destination) setting. For the other 
destinations, the same setting can be 
made by the user program P22. (Effective 
only in the monochrome copy mode)

Setting

 Specifications Operation mode 

(Common)

22

Used to set the specification 
(language) for the destination.

Setting

Specifications

Language

28

Used to set the AC power voltage. (For 
control of the fusing section heater lamp)

Setting

Power supply (DC/AC/
High)

Operation

30

Used to set the CE mark complying 
operation mode. (Conforms to the soft 
start when driving the fusing heater lamp.)

Setting

Fixing (Fusing)

Specifications

Operation mode 
(Common)

32

Used to set the fan rotating speed. (low 
speed)

Setting

Operation

35

Used to set whether the trouble history 
display by SIM 22-4 is displayed as one 
trouble or as the accumulated number of 
continuous troubles when two or more 
troubles of same kind occur continuously.

Setting

 Specifications

52

Used to set YES/NO of count up of non-
copy paper (cover or insertion paper).

Setting

Specification

Operation mode

53

Used by the user to set Enable/Disable 
auto color calibration (auto adjustment 
of color balance and density)

Setting

Specifications

Operation mode

55

Used to select the gamma 
characteristics in the color copy mode.

Setting

ICU

Operation

56

Used to set Disable/Enable of paper 
type setting of key operation P67 and 
P68.

Setting

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub