Read Sharp AR-C330 (serv.man5) Service Manual online
AR-C330 SIMULATION 8 - 4
10
0
Used to check the operation of the toner
motor and the control circuit. (Note)
Never execute this simulation with toner
in the toner hopper. Otherwise excessive
toner will enter the developing section.
Be sure to remove the toner from the
toner hopper.
motor and the control circuit. (Note)
Never execute this simulation with toner
in the toner hopper. Otherwise excessive
toner will enter the developing section.
Be sure to remove the toner from the
toner hopper.
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Developer/
Toner Hopper
Toner Hopper
Operation
14
0
Used to cancel self diag troubles H3,
H4, and H5. Inhibition of the color copy
mode operation is canceled.
H4, and H5. Inhibition of the color copy
mode operation is canceled.
Clear/Cancel (Trouble
etc.)
etc.)
Trouble
Error
15
0
Used to cancel self diag trouble U6
(Large capacity tray).
(Large capacity tray).
Clear/Cancel (Trouble
etc.)
etc.)
Paper transport
Trouble
16
0
Used to cancel self diag trouble U2.
Clear/Cancel (Trouble
etc.)
etc.)
Trouble
Error
17
0
Used to cancel self diag troubles PF
(copy inhibition command from the host
computer).
(copy inhibition command from the host
computer).
Clear/Cancel (Trouble
etc.)
etc.)
Communication unit
(TEL/LIU/MODEM etc.)
(TEL/LIU/MODEM etc.)
Trouble
Error
21
1
Used to set the maintenance cycle.
Setting
Specifications
Counter
22
1
Used to check the print count value in
each section and each operation mode.
(Used to check the maintenance timing.)
each section and each operation mode.
(Used to check the maintenance timing.)
Operation data output/
Check (Display/Print)
Check (Display/Print)
Counter
2
Used to check the total misfeed count
and the total trouble count. (If the
misfeed count is considerably great, it
may be judged as necessary to repair. By
dividing this count by the total count, the
misfeed rate can be obtained.)
and the total trouble count. (If the
misfeed count is considerably great, it
may be judged as necessary to repair. By
dividing this count by the total count, the
misfeed rate can be obtained.)
Operation data output/
Check (Display/Print)
Check (Display/Print)
Trouble
3
Used to check misfeed positions and the
misfeed count of each position. (If the
misfeed count is considerably great, it
may be judged as necessary to repair.)
(Other sections than RADF section)
misfeed count of each position. (If the
misfeed count is considerably great, it
may be judged as necessary to repair.)
(Other sections than RADF section)
Operation data output/
Check (Display/Print)
Check (Display/Print)
Trouble
Misfeed
4
Used to check the total trouble (self
diag) history.
diag) history.
Operation data output/
Check (Display/Print)
Check (Display/Print)
Trouble
5
Used to check the ROM version of
each unit (section).
each unit (section).
Others
Software
6
Used to print the setting and
adjustment data list.
adjustment data list.
Operation data output/
Check (Display/Print)
Check (Display/Print)
Operation
7
Used to display the key operator code.
(Used when the customer forgets the
key operator code.)
(Used when the customer forgets the
key operator code.)
User data output/Check
(Display/Print)
(Display/Print)
Data
User data
8
Used to check the number of uses of
the staple, and the RADF.
the staple, and the RADF.
Operation data output/
Check (Display/Print)
Check (Display/Print)
Counter
9
Used to check the number of uses (print
quantity) of each paper feed section.
quantity) of each paper feed section.
Operation data output/
Check (Display/Print)
Check (Display/Print)
Paper transport
Counter
10
Used to check the system configuration
(option, internal hardware).
(option, internal hardware).
Operation data output/
Check (Display/Print)
Check (Display/Print)
Specifications
Options
12
Used to check the misfeed positions
and the number (history) of misfeed at
each position. (If the misfeed count is
considerably great, it may be judged as
necessary to repair.)
and the number (history) of misfeed at
each position. (If the misfeed count is
considerably great, it may be judged as
necessary to repair.)
Operation data output/
Check (Display/Print)
Check (Display/Print)
RADF
Trouble
Misfeed
24
1
Used to clear the misfeed counter, the
misfeed history, the trouble counter,
and the trouble history. (After
completion of maintenance, the
counters are cleared.)
misfeed history, the trouble counter,
and the trouble history. (After
completion of maintenance, the
counters are cleared.)
Data clear
Memory
Counter
2
Used to clear the data of the number of
uses (print quantity) of each paper feed
section.
uses (print quantity) of each paper feed
section.
Data clear
Paper transport
Counter
Paper feed
3
Used to clear the data of the number of
uses of the stapler, the RADF, and the
scanner., Data clear
uses of the stapler, the RADF, and the
scanner., Data clear
Counter
4
Used to reset the maintenance counter. Data clear
Counter
Maintenance
5
Used to reset the developer counter.
(The developer counter of the installed
DV unit is reset.)
(The developer counter of the installed
DV unit is reset.)
Data clear
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Developer/
Toner Hopper
Toner Hopper
Counter
Developer
6
Used to clear the copy counters.
Data clear
Counter
7
Used to clear the OPC drum
(membrane decrease) correction
counter. (Performed when the OPC
drum is replaced.)
(membrane decrease) correction
counter. (Performed when the OPC
drum is replaced.)
Data clear
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Photo
conductor
conductor
Counter
Photo conductor
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-C330 (serv.man5) service manuals if exist.