Read Sharp AR-C260 (serv.man12) Service Manual online
AR-C260/C260M SIMULATION 9 - 39
(Result/Detail messages list)
2. [CPY/PRN] key selected: Process control mode is displayed.
[CAD] key selected: Drawing mode is displayed. (Printer, etc.)
[OTHER] key selected: The environment area and the number of
execution of process control are displayed.
[OTHER] key selected: The environment area and the number of
execution of process control are displayed.
(Displayed items)
N HV BK_GROUND
LIMIT
Error judgment level
for belt surface
detection level
difference (Allowable
range of transfer belt
surface detection
level difference (mix.
- min.) of black toner
image patch position)
for belt surface
detection level
difference (Allowable
range of transfer belt
surface detection
level difference (mix.
- min.) of black toner
image patch position)
1
255
29
O PCS_C MARKET
TARGET
Adjustment target
value (Color image
density sensor) when
adjusting the primary
LED current value by
using the calibration
plate in SIM44-36.
value (Color image
density sensor) when
adjusting the primary
LED current value by
using the calibration
plate in SIM44-36.
1
255
120
P PCS_C MARKET
LED-REV
In SIM44-36, the
toner patch density is
read by three kinds of
LED currents with the
primary LED current
adjustment value as
the center value in
order to obtain PCS
C LED ADJ value.
This is the deflection
range of the current
value in the above
case. (Color image
density sensor)
toner patch density is
read by three kinds of
LED currents with the
primary LED current
adjustment value as
the center value in
order to obtain PCS
C LED ADJ value.
This is the deflection
range of the current
value in the above
case. (Color image
density sensor)
1
255
10
44
-6
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to forcibly execute the image forming section
correction (high density process correction) (process
correction).
correction (high density process correction) (process
correction).
Section
Process (Photoconductor, developing, transfer,
cleaning)
cleaning)
Item
Operation
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key, and the image forming
section correction is started.
2. If the operation is normally completed, COMPLETE
is displayed and the correction result becomes valid.
If the operation is not normally completed, ERROPR is
highlighted and the detail of the trouble is displayed.
The detail of correction can be checked with SIM 44-9
and SIM 44-12.
highlighted and the detail of the trouble is displayed.
The detail of correction can be checked with SIM 44-9
and SIM 44-12.
Result display
Content
COMPLETE
Correction is normally completed.
ERROR
An error occurred during correction. (The
previous correction result is maintained.)
previous correction result is maintained.)
COMPULSORY
INTERRUPTION
INTERRUPTION
Compulsory interruption
Error display
Content
COLOR_SENSOR_
ADJUSTMENT_ERROR
ADJUSTMENT_ERROR
Color image density sensor
adjustment error
adjustment error
Display
Content
Min
Value
Max
Value
Default
value
BLACK_GAIN_
ADJUSTMENT_ERROR
ADJUSTMENT_ERROR
Black image density sensor gain
adjustment error
adjustment error
BLACK_SENSOR_
ADJUSTMENT_ERROR
ADJUSTMENT_ERROR
Black image density sensor
adjustment error
adjustment error
BLACK_PROCON_ERROR
High-density image density
correction (process correction)
error (K)
correction (process correction)
error (K)
CYAN_PROCON_ERROR
High-density image density
correction (process correction)
error (C)
correction (process correction)
error (C)
MAGENTA_PROCON_ERROR
High-density image density
correction (process correction)
error (M)
correction (process correction)
error (M)
YELLOW_PROCON_ERROR
High-density image density
correction (process correction)
error (Y)
correction (process correction)
error (Y)
CONNECTION_ERROR
Sensor-PCU PWB
communication trouble
communication trouble
44
-9
Purpose
Adjustment/Setting/Operation data output, check
(display, print)
(display, print)
Function
(Purpose)
(Purpose)
Used to check the data related to the image forming
section correction (the corrected main charger grid
voltage in each print mode, the developing bias voltage,
etc.). (Used to check that correction is performed
normally or not.)
section correction (the corrected main charger grid
voltage in each print mode, the developing bias voltage,
etc.). (Used to check that correction is performed
normally or not.)
Section
Process (Photoconductor, developing, transfer,
cleaning)
cleaning)
Item
Data
Operation data (Machine conditions)
Operation/
Procedure
Procedure
1. By scrolling with the scroll key, each data of the
image forming section correction result. can be
checked.
checked.
Display
Content
P (PROCON
MODE)
MODE)
Main charger grid voltage/developing bias
voltage by high density image correction (Y,
M, C, K)
voltage by high density image correction (Y,
M, C, K)
N (NORMAL
MODE (MIDDLE)
MODE (MIDDLE)
Actual main charger grid voltage/developing
bias voltage (Normal, medium speed mode)
(Y, M, C, K)
bias voltage (Normal, medium speed mode)
(Y, M, C, K)
N (NORMAL
MODE (LOW)
MODE (LOW)
Actual main charger grid voltage/developing
bias voltage (Normal, low speed mode) (Y, M,
C, K)
bias voltage (Normal, low speed mode) (Y, M,
C, K)
N (NORMAL
MODE (HIGH)
MODE (HIGH)
Actual main charger grid voltage/developing
bias voltage (Normal, high-speed mode) (Y,
M, C, K)
bias voltage (Normal, high-speed mode) (Y,
M, C, K)
TS (TONER SAVE
MODE)
MODE)
Actual main charger grid voltage /Developing
bias voltage (toner save high/medium/low
speed mode) (K)
bias voltage (toner save high/medium/low
speed mode) (K)
D (DRAWING
MODE (MIDDLE)
MODE (MIDDLE)
Actual main charger grid voltage/developing
bias voltage (Drawing, medium speed mode)
(Y, M, C, K)
bias voltage (Drawing, medium speed mode)
(Y, M, C, K)
Error display
Content
Click on the first or last page to see other AR-C260 (serv.man12) service manuals if exist.