Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 71
(Checkable sensors)
(Settable ports)
66
-29
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the data related to the address book
(one-touch registration, program registration/
expansion, interface memory box registration, each
table contents). (When the FAX is installed.)
(one-touch registration, program registration/
expansion, interface memory box registration, each
table contents). (When the FAX is installed.)
Section
FAX
Item
Data
Initializing
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key. (YES/NO key
display)
2. Press [Yes] key to clear the data stored in the
FAST memory. (Press [NO] key to cancel.)
66
-30
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the status change of the TEL/LIU
sensor. (When the FAX is installed.)
sensor. (When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
Each display is reversed or normalized according to
the status change.
the status change.
HS1
Polarity reverse signal
HS2
Polarity reverse signal
RHS
Handset hook SW
EXHS
External telephone hook SW
66
-31
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set ON/OFF of each port for output to the
TEL/LIU. (When the FAX is installed.)
TEL/LIU. (When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key. (ON: Reverse
display)
2. Press the [EXECUTE] key. (Setting is saved.)
MPXA
CION
MR
MR
EC
S
CML
CML
DP
66
-32
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check (compare) the received data (fixed
data) from the line to make judgment of error or
normal. (When the FAX is installed.)
data) from the line to make judgment of error or
normal. (When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
The fixed data received from the line are checked
and the result is displayed.
Coincide: OK is displayed. /
Not coincide: NG is displayed.
and the result is displayed.
Coincide: OK is displayed. /
Not coincide: NG is displayed.
66
-33
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to detect signals (BUSY TONE/CNG/CED/
FNET) from the line. (When the FAX is installed.)
FNET) from the line. (When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
Various signals are detected with the line
connected.
The detected signals are highlighted.
connected.
The detected signals are highlighted.
66
-34
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to display the time required for sending the
test image data. (When the FAX is installed.)
test image data. (When the FAX is installed.)
Section
FAX
Item
Operation
Operation/
Procedure
Procedure
The send test is executed, and the time to send the
image data in that test communication is measured
and displayed.
Send/receive are executed in the normal mode, and
the measure communication time (ms) is displayed.
image data in that test communication is measured
and displayed.
Send/receive are executed in the normal mode, and
the measure communication time (ms) is displayed.
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.