AR-C170 (serv.man26). Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 70

AR-C170M  SIMULATION  9 - 70

This function is enabled only when the AR-MM9 is installed. It is 
used when the ICU PWB SRAM data must be backed up in case 
of repair of the ICU PWB, etc.

This function is enabled only when the AR-MM9 is installed. It is 
used to restore the backup data of the AR-MM9 to the ICU PWB 
SRAM after completion of repair of the ICU PWB.

(Printable data)

66

-19

Backup

Used to write the ICU PWB SRAM contents (various 
set values and user data) into the Flash ROM (AR-
MM9). (When the FAX is installed.)

FAX

Data

1. Press the [EXECUTE] key. (YES/NO key 

display)

2. Press [Yes] key to write the ICU PWB SRAM 

data into the Flash ROM (AR-MM9).

66

-20

Backup

Used to write the Flash ROM (AR-MM9) contents 
(SRAM contents written with SIM 66-19) into the ICU 
PWB SRAM. (When the FAX is installed.)

FAX

Data

1. Press the [EXECUTE] key. (YES/NO key 

display)

2. Press [Yes] key to write the Flash ROM (AR-

MM9) data into the ICU PWB SRAM.

66

-21

Check

Used to print various registration information, 
communication, file management, system error, and 
protocol information. (When the FAX is installed.)

FAX

Data

1. Select items to be printed.
2. Press the [EXECUTE] key.

REGISTERED

Various registration information

MANAGEMENT

Communication management 
information

FILE MANAGEMENT

File management information

SYSTEM ERROR

System error information 

PROTOCOL

Protocol information 

66

-22

Setting

Used to set the sound volume of the handset.
(When the FAX is installed.)

FAX

Operation

1. Select the sound volume. (MIN: Minimum, 

MIDDLE: Middle, MAX. Maximum)

2. Press the [EXECUTE] key.

66

-23

Setting

Used to download the FAX program.
(When the FAX is installed.)

FAX

Operation

1. Press the [EXECUTE] key.

The FAX program is downloaded.

66

-24

Data clear

Used to clear the data in the FAST memory. (When 
the FAX is installed.)

FAX

Data

Initializing

1. Press the [EXECUTE] key. (YES/NO key 

display)

2. Press [Yes] key to clear the data stored in the 

FAST memory. (Press [NO] key to cancel.)