Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 21
(Trouble codes to be canceled)
(Trouble codes to be canceled)
(Trouble codes to be canceled)
The maintenance message is displayed in every selected cycle.
When FREE is selected, the maintenance display is not shown.
(Cycle to be set)
14
14
-0
Purpose
Clear/cancel (Trouble etc.)
Function
(Purpose)
(Purpose)
Used to cancel self diag troubles H3, H4, and H5.
Inhibition of the color copy mode operation is
canceled.
Inhibition of the color copy mode operation is
canceled.
Item
Trouble
Error
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key. (YES/NO key
display)
2. When YES key is pressed, the following troubles
are cleared. (Cancel with NO key.)
Target trouble
codes
Descriptions
H3-00
Heat roller high temperature detection (HL1)
H3-01
Heat roller high temperature detection (HL2)
H4-00
Heat roller low temperature detection (HL1)
H4-01
Heat roller low temperature detection (HL2)
H5-01
Five continuous detections of POD1 not-
reached jam
reached jam
15
15
-0
Purpose
Clear/cancel (Trouble etc.)
Function
(Purpose)
(Purpose)
Self diag U6-09 (large capacity paper feed tray)
trouble cancel
trouble cancel
Section
Paper feed
Item
Trouble
Error
Operation/
Procedure
Procedure
Press the [EXECUTE] key to cancel the trouble.
∗
Press the [CLOSE] key to terminate the
simulation.
simulation.
16
16
-0
Purpose
Clear/cancel (Trouble etc.)
Function
(Purpose)
(Purpose)
Used to cancel self diag trouble U2.
Item
Trouble
Error
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key. (YES/NO key display)
2. When YES key is pressed, the following troubles
2. When YES key is pressed, the following troubles
are cleared. (Cancel with NO key.)
Target trouble codes
Descriptions
U2-00
EEPROM read/write error (OPE)
U2-11
EEPROM check sum error (OPE)
U2-80
EEPROM read/write error (SCN)
U2-81
EEPROM check sum error (SCN)
U2-90
EEPROM read/write error (PCU)
U2-91
EEPROM check sum error (PCU)
17
17
-0
Purpose
Clear/cancel (Trouble etc.)
Function
(Purpose)
(Purpose)
Used to cancel self diag troubles PF (copy inhibition
command from the host computer).
command from the host computer).
Section
Communication (RIC/MODEM)
Item
Trouble
Error
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key. (YES/NO key
display)
2. When YES key is pressed, the following troubles
are cleared. (Cancel with NO key.)
Target trouble codes
Descriptions
PF-00
PC copy inhibition signal reception
21
21
-1
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the maintenance cycle.
Item
Specifications
Counter
Operation/
Procedure
Procedure
1. The current setup is displayed. (Highlighted)
2. When the maintenance cycle is selected with the
2. When the maintenance cycle is selected with the
key, the selected key is highlighted.
Item
Set value
Content
Default
CYCLE
0
5K
50K
1
10K
2
15K
3
40K
4
50K
5
100K
6
FREE
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.