AR-C150 (serv.man27). Discontinuation of AR-C17LD9 Colour Developer - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp AR-C150 (serv.man27) Technical Bulletin online

 
 
GMA030704 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
7.  Select “1” for both A (Cyan) & B (Magenta) to enable “N1” type developer (as shown):- 
 
 
 
 
 
       Note: If AR-C17LD9 developer is installed when using the latest PCU Firmware, change the
 value 
      
 for A & B to “2”. 
 
 
8.  Press the “Interrupt” key once and enter “Test Simulation” 25-02 (DV Adjustment Mode). 
 
 
9.  Close the Front Exterior Door and select ALL 4 Developers to perform Developer Adjustment by 
pressing the “Execute” button. 
 
Note: Cycle the Developer twice using Simulation 25-02. 
 
 
10. After Developer Adjustment has completed, exit the 
"Simulation Mode” by pressing the “C/A” Button. 
 
 
11.  Complete the setup by performing the necessary adjustments as stated within the AR-C150 – 270 
Service Manual:- 
 
 
Drum Phase Adjustment Sim 
44-31 
 
Colour Registration
 
Sim. 50-20  Main Scan (manual adjustment) 
 
     Sim. 
50-21 
Sub 
Scan 
(manual 
adjustment) 
 
 
Colour Balance:   
 
Sim 46-24  Auto Colour Calibration 
 
     Sim 
46-21 
Manual 
Colour 
Balance 
 
     Sim 
44-21 
Half 
Tone 
Correction 
 
Copy Density: 
  Sim 
46-01 
Colour   
 
     Sim 
46-02 
B/W 
  
 
 
 
 
 
 
 
Page of 3
Display

Download Sharp AR-C150 (serv.man27) Technical Bulletin