AR-C150 (serv.man109). Countermeasure Against Toner Dropping Front Side Of Copy.(White) - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-c150 (serv.man109) technical bulletin
Model
AR-C150 (serv.man109)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
1.1 MB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Countermeasure Against Toner Dropping Front Side Of Copy.(White)
File
ar-c150-sm109.pdf
Date

Read Sharp AR-C150 (serv.man109) Technical Bulletin online

IanJones - 25/05/00
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
22 January 2002
Model: ARC150
Ref.:
011
Colour: White
Page:
1 of 4
1. Model Name:
ARC150
2. General:
Toner drops from the front side of copy approximately 2cm.
3. Description:
When installing the machine or the consumables at low temperature and humidity the
above problem may occur.  Humidity and temperature are part of process control, and it is
possible that as the consumables or machine attains normal operating temperature the
toner level can be increased by 7% too high.
As the stirring action at the front of the unit is not as efficient as the rear the excessive
toner falls at the front side.
4. Action:
As with all consumables precaution should be taken that they are allowed to acclimatise.
To ensure correct stirring action, 2 rib clips that attach to the front side have been
introduced.
The clips can be ordered from the Sharp Parts Centre as UKOG-0292FCZZ price rank
AA.  Each machine will require 8 clips.
Fitting instructions as below.
1.  Remove the DV box units from the machine and remove the DV cartridge.
COUNTERMEASURE AGAINST TONER DROPPING FRONT SIDE OF COPY
TECHNICAL BULLETIN
IanJones - 25/05/00 Revision 2
Sharp Electronics (UK) Ltd., Technical Services Group
2.  Lift up the F-side, then shake that and the carrier to the R-side.
3.  Remove the DV box cover
4.  Rotate rib of MX roller to horizontal.
IanJones - 25/05/00 Revision 2
Sharp Electronics (UK) Ltd., Technical Services Group
5.  Pinch the clip by pliers.
6.  Hold DV box, then put in the clip to MX roller.
7.  Put in 2 pieces of rib clip to MX roller.
IanJones - 25/05/00 Revision 2
Sharp Electronics (UK) Ltd., Technical Services Group
8.  Rotate MX roller 90 degrees to correct way.
9.  Set up DV box cover.
10.  Set up DV cartridge.
11.  Set up DV box units to machine.
Page of 4
Display

Download Sharp AR-C150 (serv.man109) Technical Bulletin

Here you can read online and download Sharp AR-C150 (serv.man109) Technical Bulletin in PDF. AR-C150 (serv.man109) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-C150 (serv.man109) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.