AR-C150 (serv.man56). To maximise the copy quality output using full colour mode when copying and printing - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-c150 (serv.man56) technical bulletin
Model
AR-C150 (serv.man56)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
78.56 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / To maximise the copy quality output using full colour mode when copying and printing
File
ar-c150-sm56.pdf
Date
Next: Sharp AR-C150 (serv.man57) Technical Bulletin

Read Sharp AR-C150 (serv.man56) Technical Bulletin online

GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
18 May 2001
Model: ARC150
Ref.:
064
Colour: White
Page:
1 of 5
1. Model Name:
ARC150/250
2. General:
NOTE:
•
  This modification should only be performed when this product is being used in the
circumstances described above.
•
 
Toner usage may increase following the implementation of this modification.
3. Description:
It is important that the following adjustments have been checked before performing this
procedure:-
•
 
All Laser Units are aligned correctly.
•
 
OPC Drum Deflection adjustment (Drum Phase Sim 44-31).
•
 
Colour Registration Set-up (Sim 50-22).
•
 
Colour Balance & Exposure settings in "Custom Settings"
1. 
Make a Data Simulation Print using Sim 22-06.
2. 
Check all DV Bias settings are set to 325 in Test Simulation 8-01(as below).
TO MAXIMISE THE COPY QUALITY OUTPUT USING FULL
COLOUR MODE WHEN COPYING AND PRINTING
TECHNICAL BULLETIN
325
325
325
325
325
GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
3. 
Reset all Grid Bias voltages using Test Simulation 8-02 to 450.
4. 
Force Image Correction Process Control by executing Test Simulation
After the operation has completed successfully, the COMPLETE icon will be
highlighted.
5. 
Initialise the copier so the machine comes to a "Ready" condition.
(Copies will probably have either severe background or are very dark at this point).
6. 
Return the CCD Colour Balance (gamma) back to the factory default by executing
Test Simulations 63-08 and 63-05.
450
450
450
450
450
GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
7. 
Set the Half tone correction data to the default setting using Test Simulation 44-27.
8. 
Perform Auto Colour Calibration using Test Simulation 46-24.
If manual adjustments to colour balance are required, select "Service " mode.
Use Test Simulations 46-21 and 44-21 to make and store manual colour balance
settings after adjustment.
GA16052001-1
Sharp Electronics (UK) Ltd., Technical Services Group
9. 
Using the Sharp Grey Chart (UKOG-0162FCZZ), adjust all exposure levels by
using Test Simulation 46-01 (colour) and 46-02 (BW) to the specification as shown
below.
10. 
Confirm density levels in all colour exposure modes by using the Sharp A3 Colour
Test Chart as shown below.
Page of 5
Display

Download Sharp AR-C150 (serv.man56) Technical Bulletin

Here you can read online and download Sharp AR-C150 (serv.man56) Technical Bulletin in PDF. AR-C150 (serv.man56) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-C150 (serv.man56) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-C150 (serv.man56) Service Manuals

Preview DownloadPagesSize
AR-C150 (serv.man4) ARC150 250-Service Manual Service Manual 127 36.13 MB
AR-C150 (serv.man5) ARC150-Basic Manual Service Manual 62 4.23 MB
AR-C150 (serv.man7) ARC150-Operation Manual User Guide / Operation Manual 127 4.05 MB
AR-C150 (serv.man6) Parts Guide (Complete) Parts Guide 80 3.66 MB
AR-C150 (serv.man18) 102-Countermeasure for toner falling From process unit. Technical Bulletin 5 1.07 MB
AR-C150 (serv.man19) 101-Parts change of OC hinge for RHOS compliance. Technical Bulletin 1 61.93 KB
AR-C150 (serv.man20) 100-Change in ICU PWB unit. Technical Bulletin 3 252.67 KB
AR-C150 (serv.man21) 098-Reduction of toner drop caused by deformation of the toner seal blade. Technical Bulletin 1 108.17 KB
AR-C150 (serv.man22) Change to the paper feed roller material. Technical Bulletin 13 1.22 MB
AR-C150 (serv.man23) 097-Parts change information AC sub PWB, Optical Unit, DV Drive plate, Process frame MC grid. Technical Bulletin 1 61.05 KB
AR-C150 (serv.man24) 096-Reducing Occurrences of flipping of the drum cleaning blade. Technical Bulletin 6 780.93 KB
AR-C150 (serv.man25) Addition of an application auxiliary sheet. Technical Bulletin 1 72.88 KB
AR-C150 (serv.man26) Enhancement of efficiency of oil bottle replacement. Technical Bulletin 1 125.85 KB
AR-C150 (serv.man27) Discontinuation of AR-C17LD9 Colour Developer Technical Bulletin 3 263.83 KB
AR-C150 (serv.man28) Drum drive unit part code change Technical Bulletin 2 621.6 KB
AR-C150 (serv.man29) Corrective action for drum mark detection failure Technical Bulletin 1 31.02 KB
AR-C150 (serv.man30) Part change information - LSU unit. Technical Bulletin 1 7.59 KB
AR-C150 (serv.man31) Oil-supply capability improvement Technical Bulletin 1 24.05 KB
AR-C150 (serv.man32) Part change information drum drive unit Technical Bulletin 1 14.89 KB
AR-C150 (serv.man33) Shape change to Application Sheet and Application Pipe Technical Bulletin 1 23.33 KB
AR-C150 (serv.man34) Part guide corrections Technical Bulletin 2 38.87 KB
AR-C150 (serv.man35) Part change information - CCD power supply cassette unit Technical Bulletin 1 26.26 KB
AR-C150 (serv.man36) Improvement for toner spatter Technical Bulletin 1 24.53 KB
AR-C150 (serv.man37) Improvement for misalignment of the starting position of the scanning operation Technical Bulletin 1 15.38 KB
AR-C150 (serv.man38) PCU main PWB part change information Technical Bulletin 1 14.57 KB
AR-C150 (serv.man39) Exterior covers part change information Technical Bulletin 2 41.05 KB
AR-C150 (serv.man40) Front Exterior Door (Lower) Breaking Technical Bulletin 2 59.79 KB
AR-C150 (serv.man41) Parts change information to capacitor Technical Bulletin 1 25.32 KB
AR-C150 (serv.man42) Troubleshooting Copy Quality Technical Bulletin 12 167.67 KB
AR-C150 (serv.man43) Manual feed part change information Technical Bulletin 2 37.35 KB
AR-C150 (serv.man44) Measures to prevent clogging due to paper dust. Technical Bulletin 1 30.26 KB
AR-C150 (serv.man45) Preventive Maintenance Procedure Technical Bulletin 5 282.26 KB
AR-C150 (serv.man46) Parts change information Technical Bulletin 1 13.36 KB
AR-C150 (serv.man47) Action carried out to diminish the amount of toner that scatters from the DV unit Technical Bulletin 1 51.51 KB
AR-C150 (serv.man48) Parts change - upper fuser cover Technical Bulletin 1 32.72 KB
AR-C150 (serv.man49) Part change - resist roller paper Technical Bulletin 1 32.62 KB
AR-C150 (serv.man50) Shading glass material change Technical Bulletin 1 32.94 KB
AR-C150 (serv.man51) Part change - upper cleaner roller (fuser) Technical Bulletin 1 34 KB
AR-C150 (serv.man52) Change made in the resistance of the ICU-main PWB Technical Bulletin 1 30.42 KB
AR-C150 (serv.man53) Parts change informaton Technical Bulletin 1 30.74 KB
AR-C150 (serv.man54) Parts change information Technical Bulletin 2 89.77 KB
AR-C150 (serv.man55) Change carried out to the thermistor (fuser section) Technical Bulletin 1 21.1 KB
AR-C150 (serv.man57) Parts change to the paper feeding unit Technical Bulletin 1 32.78 KB
AR-C150 (serv.man58) Establishment of the DV bias unit as a service part Technical Bulletin 1 23.07 KB
AR-C150 (serv.man59) Change carried out to the rotation control plate of the transfer unit Technical Bulletin 4 172.94 KB
AR-C150 (serv.man60) Parts change (connection drive, harness guide plate, fusing upper frame, wire band) Technical Bulletin 1 30.97 KB
AR-C150 (serv.man61) Change carried out in the fusing handle Technical Bulletin 1 29.73 KB
AR-C150 (serv.man62) Uniform usage of parts established Technical Bulletin 1 30.04 KB
AR-C150 (serv.man63) Points of caution to be observed during service operations Technical Bulletin 1 19.13 KB
AR-C150 (serv.man64) Parts change information Technical Bulletin 1 31.72 KB
AR-C150 (serv.man65) Measure to alleviate problems of streaking from the paper delivery roller. Technical Bulletin 4 225.14 KB
AR-C150 (serv.man66) Discontinuance of the colour discrimination sheets used for the drum unit. Technical Bulletin 1 60.58 KB
AR-C150 (serv.man67) Part change information. Technical Bulletin 2 107.64 KB
AR-C150 (serv.man68) Parts change information. Technical Bulletin 2 107.22 KB
AR-C150 (serv.man69) Parts information. Technical Bulletin 2 95.04 KB
AR-C150 (serv.man70) Change carried out in the ROM (Firmware). Technical Bulletin 9 311.64 KB
AR-C150 (serv.man71) Change of material for application roller gear. Technical Bulletin 1 84.84 KB
AR-C150 (serv.man72) Change of shape discontinuation of handle stay. Technical Bulletin 2 90.4 KB
AR-C150 (serv.man73) Discontinuation of toner hopper connector cover. Technical Bulletin 1 74.99 KB
AR-C150 (serv.man74) Change of paper delivery cabinet and paper delivery PG. Technical Bulletin 1 85.12 KB
AR-C150 (serv.man75) Change carried out to the colour correction ROM. Technical Bulletin 1 71.44 KB
AR-C150 (serv.man76) E7-11 error (shading errors) corrections. Technical Bulletin 1 74.09 KB
AR-C150 (serv.man77) Change in shape of upper transport PG. Technical Bulletin 1 75.9 KB
AR-C150 (serv.man78) Change of the ICU-LSU harness. Technical Bulletin 2 86.79 KB
AR-C150 (serv.man79) Change of bushing materials. Technical Bulletin 1 72.61 KB
AR-C150 (serv.man80) Change of supplier for parts used in scanner unit and increase of noise margins. Technical Bulletin 1 74.07 KB
AR-C150 (serv.man81) Change of fixing screw for upper and lower frames of fusing unit. Technical Bulletin 1 87.8 KB
AR-C150 (serv.man82) Change of shape and discontinued parts for cushion used in toner duct. Technical Bulletin 2 116.71 KB
AR-C150 (serv.man83) Change of spring load for transfer separator PAWL unit. Technical Bulletin 1 80.2 KB
AR-C150 (serv.man84) Change to conform with IEC standard for lighting surge noise. (WHITE) Technical Bulletin 2 99.62 KB
AR-C150 (serv.man85) Change from square tube to U-shaped plate in chassis unit. (WHITE) Technical Bulletin 2 88.93 KB
AR-C150 (serv.man86) Change of coupling in paper feeding drive unit. (WHITE) Technical Bulletin 1 88.54 KB
AR-C150 (serv.man87) Change in form of supplied waste toner bottle. (WHITE) Technical Bulletin 1 72.55 KB
AR-C150 (serv.man88) Firmware version upgrade (maintenance No. 7). (WHITE) Technical Bulletin 1 65.26 KB
AR-C150 (serv.man89) Measure to alleviate problems of streaking due to a problem in the transfer unit. (WHITE) Technical Bulletin 1 74.15 KB
AR-C150 (serv.man90) Change carried out to the main PWB of the PCU. (WHITE) Technical Bulletin 1 60.96 KB
AR-C150 (serv.man91) Change in unit parts for operation panel. (WHITE) Technical Bulletin 1 123.64 KB
AR-C150 (serv.man92) Change in shape of tension shaft for the transfer belt in the transfer unit. (WHITE) Technical Bulletin 1 125.37 KB
AR-C150 (serv.man93) Change in materials and shape of fusing upper cover. (WHITE) Technical Bulletin 1 133.08 KB
AR-C150 (serv.man94) Change carried out in the attachment screws for the operation panel LCD. (WHITE) Technical Bulletin 1 133.55 KB
AR-C150 (serv.man95) Change carried out in the maker of some of the parts int he outside transfer belt unit and the inside transfer belt unit. (WHITE) Technical Bulletin 1 122.33 KB
AR-C150 (serv.man96) Change carried out in the attachment screws of the front cabinet band in the chassis unit. (WHITE) Technical Bulletin 1 124.17 KB
AR-C150 (serv.man97) Change carried out in the shape of the harness guide plate in the fusing unit. (WHITE) Technical Bulletin 2 132.57 KB
AR-C150 (serv.man98) Change carried out in the 100V and 200V DC main power supply units. (WHITE) Technical Bulletin 1 129.92 KB
AR-C150 (serv.man99) Change carried out in the maker of the gasket. (WHITE) Technical Bulletin 2 156.85 KB
AR-C150 (serv.man100) Change carried out in the dimensions tolerance of the side seal F and R in the processing unit. (WHITE) Technical Bulletin 1 124.52 KB
AR-C150 (serv.man101) Discontinuance of the clinching nut used in the process slide rail. (WHITE) Technical Bulletin 1 125.07 KB
AR-C150 (serv.man102) Change carried out in the screws of the scanner main unit. (WHITE) Technical Bulletin 1 123.7 KB
AR-C150 (serv.man103) Change carried out in the construction of the transfer waste toner tank unit. (WHITE) Technical Bulletin 3 922.66 KB
AR-C150 (serv.man104) Change in shape carried out in the TB socket holder M C and the TB socket holder K of the transfer unit. (WHITE) Technical Bulletin 2 128.97 KB
AR-C150 (serv.man105) Addition carried out of a core in the scanner unit. (WHITE) Technical Bulletin 1 131.65 KB
AR-C150 (serv.man106) Action carried out on the developing drive joint belt C to alleviate problems of skipping. (WHITE) Technical Bulletin 1 128.25 KB
AR-C150 (serv.man107) Measure carried out to improve the performance of the No.2 and No.3 mirrors of the scanner main unit. (WHITE) Technical Bulletin 1 119.68 KB
AR-C150 (serv.man108) Change carried out in the shape of the paper delivery joint plate. (WHITE) Technical Bulletin 1 121.06 KB
AR-C150 (serv.man109) Countermeasure Against Toner Dropping Front Side Of Copy.(White) Technical Bulletin 4 1.1 MB
AR-C150 (serv.man110) Dealing With (1MM) Pitch Unevenness. (WHITE) Technical Bulletin 1 72.44 KB
AR-C150 (serv.man111) Measure To Prevent Snagging Of The Insertion Detection Switch In The Belt Unit. (WHITE) Technical Bulletin 1 80.7 KB
AR-C150 (serv.man112) Countermeasure Against Falling Of The Upper CL Roller. (WHITE) Technical Bulletin 2 86.22 KB
AR-C150 (serv.man113) 1.Load Change Of The Transfer Pressure Spring. 2.Change Of The ADU Gate. (WHITE) Technical Bulletin 2 92.51 KB
AR-C150 (serv.man114) Abolishment Of Taps On The Hopper Fixing Plate And Material Change Of The Hopper Fixing Plate. (WHITE) Technical Bulletin 1 141.22 KB
AR-C150 (serv.man115) Addition Of A Door Switch Holder Screw. (WHITE) Technical Bulletin 1 75.54 KB
AR-C150 (serv.man116) Disuse Of The Waste Toner Transport Unit Fixing Screws. (WHITE) Technical Bulletin 1 80.9 KB
AR-C150 (serv.man117) Change Of Developer Unit Sheet A. (WHITE) Technical Bulletin 1 84.08 KB
AR-C150 (serv.man118) 1.Change Carried Out In The Colour Of The MX Gear T18 In The Developing Unit. 2.Change Carried Out In The Fixing Sleeve Of The Drum. 3.Discontinuance Of The Washer In The Waste Toner Transport Unit. (WHITE) Technical Bulletin 2 77.22 KB
AR-C150 (serv.man119) Establishment Of The LSU Heater Unit As A Service Part. (WHITE) Technical Bulletin 2 104.41 KB
AR-C150 (serv.man13) AR-C150 PCU Firmware v6.04FN1 (Bear Cougar Tools). Upgrade details enclosed. Driver / Update 1.81 MB
AR-C150 (serv.man14) AR-C150 PCU Firmware v6.04d (Cougar Bear Tool) Driver / Update 1.77 MB
AR-C150 (serv.man15) AR-C150 ICU Firmware v6.01 (Cougar Bear Tool) Driver / Update 1.54 MB
AR-C150 (serv.man16) AR-C150 OPE Firmware v6.00 (Cougar Bear Tool) Driver / Update 1.87 MB
AR-C150 (serv.man17) Flash 5.1 Download Utility (Cougar Tool) Driver / Update 16.94 KB
AR-C150 ARC150-330 Handy Guide (Jun 05) Handy Guide 44 863.39 KB
AR-C150 (serv.man2) ARC150-330 Technical Update Handy Guide (Jun 05) Handy Guide 4 31.06 KB
AR-C150 (serv.man3) AR-C150-330 Peripheral Installation Handy Guide (Feb 05) Handy Guide 40 1.5 MB
AR-C150 (serv.man8) Colour Consumables Matrix for AR-C150 C160 C250 C270 C330. FAQ 5.66 KB
AR-C150 (serv.man9) Firmware Revision Table. FAQ 5 102.18 KB
AR-C150 (serv.man10) Paper Recommendations. FAQ 2 16.51 KB
AR-C150 (serv.man11) Service Exchange Scheme Request Form (TP ServiceCo) FAQ 1 7.68 KB
AR-C150 (serv.man12) ARC150 Firmware Upgrade Procedure FAQ 7 159.43 KB
AR-C150 (serv.man120) MSDS (F-31318) for AR-C33DV9 (Yellow Developer) Regulatory Data 4 30.8 KB
AR-C150 (serv.man121) Toner MSDS F00928 Regulatory Data 4 28.55 KB
AR-C150 (serv.man122) Toner MSDS F00927 Regulatory Data 4 28.59 KB
AR-C150 (serv.man123) Toner MSDS F00926 Regulatory Data 4 28.56 KB
AR-C150 (serv.man124) Toner MSDS F00921 Regulatory Data 4 31.1 KB
AR-C150 (serv.man125) Developer MSDS F30921 Regulatory Data 2 16.11 KB
AR-C150 (serv.man126) Developer MSDS F30927 Regulatory Data 4 31.04 KB
AR-C150 (serv.man127) Developer MSDS F30928 Regulatory Data 4 31.02 KB
AR-C150 (serv.man128) Environmental Data Sheet Regulatory Data 14 32.56 KB
AR-C150 (serv.man129) MSDS for Silicon Oil Regulatory Data 2 10.14 KB

Random: