AR-810 (serv.man14). Process section - Sharp Copying Equipment Service Manual (repair manual). Page 12

Read Sharp AR-810 (serv.man14) Service Manual online

AR-651/810  PROCESS SECTION  10 - 12
[G]  Exhaust duct
(1) Take off the exit side upper cover and open
the exit cover.
(2) Disconnect 3 connectors and release the
harnesses from 4 clamps.
(3) Unhook the exhaust duct with sliding it toward
the front side and pull it out.
(4) Disconnect 1 connector and pull out the duct
out fan.
(5) Remove 2 screws and take off the exit fan
with the bracket.
(6) Remove 2 screws and release the exit fan
from the bracket.
Connector
Connector
Clamp
Duct out fan
Exit fan
Page of 12
Display

Download Sharp AR-810 (serv.man14) Service Manual (Repair Manual)

Found More:

AR-810 (serv.man14) Service Manuals

Preview DownloadPagesSize
AR-810 (serv.man12) Laser optical unit Service Manual 9 877.36 KB
AR-810 (serv.man23) Unpacking and installation Service Manual 11 1.2 MB
AR-810 (serv.man22) Printed wiring boards Service Manual 7 4.21 MB
AR-810 (serv.man21) Power supply unit Service Manual 8 110.03 KB
AR-810 (serv.man20) RADF (Document feeder) Service Manual 91 3.35 MB
AR-810 (serv.man19) Exit reversing unit Service Manual 8 322.91 KB
AR-810 (serv.man18) Fuser unit Service Manual 21 647.22 KB
AR-810 (serv.man17) Transfer transporter unit Service Manual 10 462.6 KB
AR-810 (serv.man16) Developer unit Service Manual 21 585.54 KB
AR-810 (serv.man15) Drum cleaner unit Service Manual 10 281.09 KB
AR-810 (serv.man13) Paper feeding section Service Manual 25 847.82 KB
AR-810 (serv.man11) Image processing Service Manual 8 55.64 KB
AR-810 (serv.man10) Scanning section Service Manual 14 100.65 KB
AR-810 (serv.man9) Control panel Service Manual 12 199.17 KB
AR-810 (serv.man8) General operations Service Manual 14 97.83 KB
AR-810 (serv.man7) Copy process Service Manual 11 177.81 KB
AR-810 (serv.man6) Component layout functions Service Manual 30 1.25 MB
AR-810 (serv.man5) Front cover, precautions and contents Service Manual 5 80.44 KB
AR-810 (serv.man4) AR651 810-Service Handbook Service Manual 127 17.7 MB
AR-810 (serv.man3) AR651 810-Circuit Diagrams Service Manual 127 9.77 MB
AR-810 (serv.man24) Complete service manual Service Manual 127 14.46 MB
AR-810 (serv.man26) AR651 810 Operation Manuals User Guide / Operation Manual 127 3.81 MB
AR-810 (serv.man25) AR651 810-Parts Guide Parts Guide 127 22.77 MB
AR-810 (serv.man2) Specifications Specification 15 120.76 KB
AR-810 (serv.man53) The improvement for image glossy lines due to grease of cleaning roller. Technical Bulletin 2 82.16 KB
AR-810 (serv.man45) Change of the PWB unit in the laser optical unit. Technical Bulletin 1 104.34 KB
AR-810 (serv.man46) Change of torque limiter. Technical Bulletin 1 91.88 KB
AR-810 (serv.man47) Parts change information regarding the lower frame and inversion open guide part 1. Technical Bulletin 2 155.27 KB
AR-810 (serv.man48) Measure to prevent breakage of one way bearing on cleaning web. Technical Bulletin 3 272.27 KB
AR-810 (serv.man49) Revision of illustration of 4 Lower frame section in the parts guide Technical Bulletin 2 353.24 KB
AR-810 (serv.man50) ROM upgrade ... (5) Technical Bulletin 10 153.94 KB
AR-810 (serv.man51) Change of parts to extend service life of paper feed section roller. Technical Bulletin 6 480.62 KB
AR-810 (serv.man52) The improvement for displaying tandem LCF check paper Technical Bulletin 6 1.64 MB
AR-810 (serv.man33) Correction of SRAM parts code. Technical Bulletin 1 15.71 KB
AR-810 (serv.man54) The improvement for waving vertical lines in the rear side of the copy image Technical Bulletin 2 240.2 KB
AR-810 (serv.man55) Correction for loss of image 1 3 from the trail edge Technical Bulletin 1 12.31 KB
AR-810 (serv.man56) Countermeasure for background CD3 error near toner empty-toner recycle pipe blockage. Technical Bulletin 2 32.94 KB
AR-810 (serv.man57) Change of part code of PWB unit listed in the fusing drive section in the part guide 24 . Technical Bulletin 1 22.35 KB
AR-810 (serv.man58) Correction of parts codes of pulleys on the reversion drive unit listed in the part guide 13 . Technical Bulletin 1 14.8 KB
AR-810 (serv.man59) Improvement carried out to stop EB5 jam, due to over running of the paper stop position. Technical Bulletin 1 8.1 KB
AR-810 (serv.man60) ROM upgrading (4) Technical Bulletin 8 46.83 KB
AR-810 (serv.man61) Required attention when installing the OPC drum to the cleaner unit. Technical Bulletin 2 855.9 KB
AR-810 (serv.man43) Change of the PWB unit in section 88 (RADF hinge) of the parts guide. Technical Bulletin 1 102.84 KB
AR-810 (serv.man27) Improvement against wrong detection of CD1 and CD2 Technical Bulletin 2 282.46 KB
AR-810 (serv.man28) 1 Change in sensors and screws to comply with RoHS, 2 One part code available for seal part, 3 Providing commonality of parts and discontinued use of arrow labels, 4 Change in cassette shafts to comply with RoHS, 5 Change in bushings. Technical Bulletin 4 172.22 KB
AR-810 (serv.man29) 1. Part change of the fusing unit, 2. Change in power cords for the UK to comply with RoHS, 3. Parts guide correction. Technical Bulletin 3 57.58 KB
AR-810 (serv.man30) ROM upgrade 9, Sys ROM 013, UI ROM 012, Main ROM 16, Laser ROM 09, Scanner ROM 08, PFC ROM 08, RADF 03. Please contact TP Matrix for upgrade cards. Technical Bulletin 2 15.69 KB
AR-810 (serv.man31) Correction to parts code and illustration of upper cover rear and upper cover right. Technical Bulletin 1 17.52 KB
AR-810 (serv.man32) Discontinued use of coupling seal. Technical Bulletin 1 16.1 KB
AR-810 (serv.man34) Correction of SRAM parts code. Technical Bulletin 1 12.92 KB
AR-810 (serv.man35) Correction to parts guide. Technical Bulletin 2 59.02 KB
AR-810 (serv.man36) 1 Change in solenoids and automatic toner sensors (adaptation to RoHS). 2 Addition of sensor protection sheet. Technical Bulletin 3 50.87 KB
AR-810 (serv.man37) Change of TRU rail Technical Bulletin 1 23.14 KB
AR-810 (serv.man38) Correction to the parts code and illustration of the upper cover rear and upper cover right. Technical Bulletin 1 17.47 KB
AR-810 (serv.man39) ROM Upgrade...7 - Main ROM 15 Technical Bulletin 1 85.99 KB
AR-810 (serv.man40) Change in the manual feed tray shape and corrections to screw description. Technical Bulletin 2 165.15 KB
AR-810 (serv.man41) Lens cover design change. Technical Bulletin 1 80.18 KB
AR-810 (serv.man42) Modification of the tip shape of the drum pick off pawl. Technical Bulletin 1 67.67 KB
AR-810 (serv.man44) Change in length of screw for the drum drive unit. Technical Bulletin 1 83.74 KB
AR-810 AR651 810 Handy Guide Handy Guide 60 2.33 MB
AR-810 (serv.man62) MSDS F-31171 Regulatory Data 4 404.69 KB
AR-810 (serv.man63) MSDS F-01171 Regulatory Data 4 425.15 KB

Random: