Read JBL DUET 200 (serv.man3) EMC - CB Certificate online
Test Report issued under the responsibility of
www.nemko.com
This Test Report , when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory,
or by a laboratory having special agreement with Nemko.
or by a laboratory having special agreement with Nemko.
TEST REPORT
IEC 60950-1: 2005 (2nd Edition) and/or EN 60950-1:2006
Information technology equipment – Safety –
Part 1: General requirements
Report Reference No
. ....................: 111798
Tested by (name + signature) ..........:
Kenny Ho
Witnessed by (name + signature) ....: N/A
Supervised by (name + signature) ...: N/A
Approved by (name + signature)......:
Sam-Geun Gwack
Date of issue ....................................: 27
August 2008
CB Testing Laboratory Name
.......: Nemko Hong Kong Ltd.
Phone: (+ 852) 2675 0288
Address ...........................................: Unit 3-5, 1/F , Festigood Centre, 8 Lok Yip Road, On Lok Tsuen,
Fanling, N.T., Hong Kong
Testing location / procedure.............: CBTL
RMT
SMT
WMT
TMP
Testing location / address ................: Same as above.
Applicant’s name
............................: Harman Multimedia
Test specification:
Standard...........................................: IEC
60950-1:2005 (2nd Edition) and/or EN 60950-1:2006
Test procedure .................................: CB/CCA
Non-standard test method…………..: N/A
Test Report Form No
......................: IECEN60950_1C
Test Report Form(s) Originator....................... :
SGS Fimko Ltd
Master TRF..................................................... :
2006-06
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is
acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume
liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and
context.
acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume
liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and
context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo shall be removed
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
- Page 2 of 62 -
Report
No. 111798
TRF No. IECEN60950_1C
Test item description .....................:
Computer Speaker system
Trade Mark .......................................:
JBL
Manufacturer ....................................:
Same as applicant
Model/Type reference ......................:
jbl duet - 200
Ratings .............................................:
Test sample without serial number
I/P: 1.2A 18V DC
Name and address of production-sites (Factory):
Harman JBL (Suzhou) Ltd.
3, Jinshan Road, Suzhou New District, Jiangsu Province, 215011, China
Harman JBL (Suzhou) Ltd.
3, Jinshan Road, Suzhou New District, Jiangsu Province, 215011, China
Copy of marking plate and summary of test results (information/comments):
The above label is a draft of an artwork for marking plate pending approval by National Certification Bodies
and it shall not be affixed to products prior to such an approval.
- Page 3 of 62 -
Report
No. 111798
TRF No. IECEN60950_1C
Summary of testing:
Tested according to national requirements
for the following countries:
for the following countries:
All CENELEC members as listed in EN 60950-1:2001.
All CB members as listed in CB Bulletin 112A, December
2006, except Israeli difference.
List from IEC 60950-1: 2001 edition:
Australian differences: CB Bulletin 112A, December 2006
Canadian differences: CB Bulletin 112A, December 2006
Korean differences: CB Bulletin 112A, December 2006
US differences: CB Bulletin 112A, December 2006
Singapore differences: CB Bulletin 112A, December 2006
Israeli differences: (not related to CB Bulletin 112A,
December 2006)
Chinese differences: CB Bulletin 112A, December 2006
Japanese differences: CB Bulletin 112A, December 2006
All CB members as listed in CB Bulletin 112A, December
2006, except Israeli difference.
List from IEC 60950-1: 2001 edition:
Australian differences: CB Bulletin 112A, December 2006
Canadian differences: CB Bulletin 112A, December 2006
Korean differences: CB Bulletin 112A, December 2006
US differences: CB Bulletin 112A, December 2006
Singapore differences: CB Bulletin 112A, December 2006
Israeli differences: (not related to CB Bulletin 112A,
December 2006)
Chinese differences: CB Bulletin 112A, December 2006
Japanese differences: CB Bulletin 112A, December 2006
Radio and television interference
suppression Compliance with the EMC
directive is necessary for achieving type
certification. The appliance shall comply
with the relevant EMC standrads, depending
on the equipment in question. In NO,
compliance with standards for radio
interference suppression is a part of
Nemko’s certification.
In Fl, DK and SE compiance is not
necessary for achieving safety certification.
suppression Compliance with the EMC
directive is necessary for achieving type
certification. The appliance shall comply
with the relevant EMC standrads, depending
on the equipment in question. In NO,
compliance with standards for radio
interference suppression is a part of
Nemko’s certification.
In Fl, DK and SE compiance is not
necessary for achieving safety certification.
The equipment has been tested for EMC.
1.5, 2.5. 3.2 External Power Supply
The external power supply was not evaluated as part of this
report. An external power supply approved to IEC 60950
shall be provided. The external power supply output shall be
separately certified as limited power source, complying with
the national regulations of the countries in which the
appliance is to be sold.
report. An external power supply approved to IEC 60950
shall be provided. The external power supply output shall be
separately certified as limited power source, complying with
the national regulations of the countries in which the
appliance is to be sold.
List of attachments:
Photos
Australian differences
Canadian differences
Korean differences
Singapore differences
US differences
Israeli differences
Chinese differences
Japanese differences
Photos
Australian differences
Canadian differences
Korean differences
Singapore differences
US differences
Israeli differences
Chinese differences
Japanese differences
- Page 4 of 62 -
Report
No. 111798
TRF No. IECEN60950_1C
Test item particulars
.................................................. :
Equipment mobility .................................................... :
movable
hand-held
stationary
fixed
Connection to the mains ........................................... :
pluggable equipment
direct plug-in
permanent connection
for building-in
Operating condition ................................................... :
continuous
short-time
intermittent
Over voltage category .............................................. :
OVC I
OVC II
OVC III
OVC IV
Mains supply tolerance (%)....................................... : N/A
Tested for IT power systems .................................... :
Tested for IT power systems .................................... :
Yes
No
IT testing, phase-phase voltage (V) ......................... : N/A
Class of equipment ................................................... :
Class of equipment ................................................... :
Class I
Class II
Class III
Not classified
Mass of equipment (kg)............................................. : Weight: 0.7 kg
Dimension: 359mm x 110mm x 64mm
Pollution degree ....................................................... :
PD 2
PD 3
IP protection class .................................................... : IP20
Measuring instrument
Inv. no.
Date
Possible test case verdicts:
- test case does not apply to the test object .................: N (N/A)
- test object does meet the requirement.......................: P (Pass)
- test object does not meet the requirement.................: F (Fail)
Testing
..........................................................................:
Date of receipt of test item ............................................: August 2008
Date(s) of performance of tests ....................................: August 2008
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
"(see appended table)" refers to a table appended to the report.
Throughout this report a
comma /
point is used as the decimal separator.