AR-810 (serv.man5). Front cover, precautions and contents - Sharp Copying Equipment Service Manual (repair manual)

ar-810 (serv.man5) service manual
Model
AR-810 (serv.man5)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
80.44 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Front cover, precautions and contents
File
ar-810-sm5.pdf
Date

Read Sharp AR-810 (serv.man5) Service Manual online

CONTENTS
Parts marked with “
” are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
SERVICE MANUAL
CODE: 00ZAR810//F1E
DIGITAL COPIER
AR-651
MODEL
 AR-810
1. SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2. COMPONENT LAYOUT & FUNCTIONS  . . . . . . . . . . . . . . . . . . . . 2-1
3. COPY PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4. GENERAL OPERATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
6. SCANNING SECTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
7. IMAGE PROCESSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
8. LASER & OPTICAL UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
9. PAPER FEEDING SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
10. PROCESS SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
11. DRUM/CLEANER UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
12. DEVELOPER UNIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
13. TRANSFER/TRANSPORT UNIT  . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
14. FUSER UNIT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1
15. EXIT/REVERSING UNIT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1
16. RADF (DOCUMENT FEEDER)  . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1
17. POWER SUPPLY UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1
18. PRINTED WIRING BOARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1
19. UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 19-1
GENERAL PRECAUTIONS REGARDING THE INSTALLATION
AND SERVICE FOR THE COPIER AR-651/810
The installation and service should be done by a qualified service technician.
1.
Transportation/Installation
• When transporting/installing the copier, move it by the casters while lifting the stoppers.
The copier is quite heavy and weighs approximately 200 kg (441 lb), therefore use caution
when handling it.
• Be sure to use a dedicated line with AC 115V or 120V/20A (220V, 230V, 240V/10A) or more for its
power source.
• The copier must be properly grounded for safety.
Never ground it to a gas pipe or a water pipe.
• Select a suitable place for installation.
Avoid excessive heat, high humidity, dust, vibration, direct sunlight and areas where the tempera-
ture may change rapidly such as in direct line with a heating or cooling duct.
• Also provide proper ventilation as the copier emits a slight amount of ozone.
• To insure adequate working space for the copying operation, keep a minimum clearance of
80 cm (32”) on the left, 80 cm (32”) on the right and 10 cm (4”) in the rear.
• The power source must be installed near the copier and should be easily accessible in proper
safety.
Do not use an extension cord to provide power.
2.
Service of Machines
• Basically, be sure to turn the main switch off and unplug the power cord during service.
• Be sure not to touch high-temperature sections such as the exposure lamp, the fuser unit, the
damp heater and their periphery.
• Be sure not to touch the high-voltage sections such as the chargers, high-voltage transformer,
exposure lamp control inverter, inverter for the LCD backlight and power supply unit. These com-
ponents and their PWB's should not be touched even if the power has been turned off since   an
electirc charge may remain in their condensers, etc.
• Be sure not to touch rotating/operating sections such as gears, belts, pulleys, fan, etc.
• Be careful when removing the covers since there might be parts with very sharp edges under-
neath.
• When servicing the machines with the main switch turned on, be sure not to touch live sections
and rotating/operating sections. Avoid exposure to the laser's radiation.
• Use suitable measuring instruments and tools with the proper specifications.
• Avoid exposure to the laser's radiation during servicing.
- Avoid direct exposure to the laser beam.
- Do not insert tools, parts, etc. that are reflective into the path of the laser beam.
- Remove all watches, rings, bracelets, etc. that are reflective.
3.
Main Service Parts for Safety
• The breaker's, door switch's, fuse's, thermostat's, thermofuse's, thermistor's, etc. are particularly
important for safety. Be sure to handle/install them properly. Do not allow a short circuit to occur to
maintain the safety rating of the equipment replace these parts with only genuine Sharp parts of
the same type and makers.
4.
Cautionary Labels
• During servicing, be sure to check the rating plate and the cautionary labels such as “Unplug the
power cord during service”, “Hot area”, “Laser warning label” etc. to ensure they are legrable a
properly installed to the equipment.
5.
Disposition of Consumable Parts, Packing Materials, Used batteries and RAM-ICs
• Regarding the recovery and disposal of the copier, supplies, consumable parts, packing materials,
used batteries and RAM-ICs including litium batteries, it is recommended to follow the relevant
local regulations or rules.
6.
When parts are disassembled, reassembly is basically the reverse of disassembly unless
otherwise noted in this manual or other related documents. Be careful not to reassemble
small parts such as screws, washers, pins, E-rings, star washers in the wrong places or in the
wrong order.
7.
Basically, the machine should not be operated with any parts removed or disassembled.
8.
Precautions Against Static Electricity
• The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,
because the ICs on it may become damaged due to static electricity.
Caution: Before using the wristband, pull out the power cord plug of the copier and make
sure that there are no uninsulated charged objects in the vicinity.
Caution :
Dispose of used batteries and RAM-ICs including  lithium batteries
according with Federal, State and local regulations.
Attention :
Se débarrasser de batteries et RAM-ICs usés y compris les batteries en
lithium selon ce manuel.
Vorsicht :
Entsorgung des gebrauchten Batterien und RAM-ICs (inklusive
der Lithium-Batterie) nach diesem Handbuch.
I
CONTENTS
1.
SPECIFICATIONS
1. 1.
Specifications  . . . . . . . . . . . . . . . . . . 1-1
1. 2.
Accessories . . . . . . . . . . . . . . . . . . . 1-13
1. 3.
Options  . . . . . . . . . . . . . . . . . . . . . . 1-13
1. 4.
Supplies. . . . . . . . . . . . . . . . . . . . . . 1-14
1. 5.
System List . . . . . . . . . . . . . . . . . . . 1-15
2.
COMPONENT LAYOUT & FUNCTIONS
2. 1.
Sectional View. . . . . . . . . . . . . . . . . . 2-1
2. 2.
Electric Parts Layout . . . . . . . . . . . . . 2-5
2. 3.
Symbols and Functions of 
Various Components. . . . . . . . . . . . 2-16
2. 4.
Symbols and Functions of 
RADF Various Components  . . . . . . 2-24
2. 5.
System Block Layout. . . . . . . . . . . . 2-26
2. 6.
Disassembly and Replacement 
of Covers and PC Boards . . . . . . . . 2-27
3.
COPY PROCESS
3. 1.
General Description. . . . . . . . . . . . . . 3-1
3. 2.
Details of Copy Process  . . . . . . . . . . 3-2
3. 3.
Comparison of Copy Process 
to AR-650/800 . . . . . . . . . . . . . . . . . 3-10
4.
GENERAL OPERATIONS
4. 1.
Overview of Operation. . . . . . . . . . . . 4-1
4. 2.
Operation. . . . . . . . . . . . . . . . . . . . . . 4-1
4. 3.
Abnormality Detection . . . . . . . . . . . . 4-6
4. 4.
Flowchart. . . . . . . . . . . . . . . . . . . . . 4-11
5.
CONTROL PANEL
5. 1.
Control Panel and Display Panel. . . . 5-1
5. 2.
Items Shown on Display Panel . . . . . 5-2
5. 3.
Relation between Copier State 
and Operator’s Action . . . . . . . . . . . . 5-7
5. 4.
Operation. . . . . . . . . . . . . . . . . . . . . . 5-8
5. 5.
Disassembly and Replacement. . . . 5-11
6.
SCANNING SECTION
6. 1.
Function. . . . . . . . . . . . . . . . . . . . . . . 6-1
6. 2.
Construction  . . . . . . . . . . . . . . . . . . . 6-2
6. 3.
Operation. . . . . . . . . . . . . . . . . . . . . . 6-4
6. 4.
Control for Exposure Lamp . . . . . . . . 6-7
6. 5.
CCD Control  . . . . . . . . . . . . . . . . . . 6-10
6. 6.
Automatic Original Size 
Detection Circuit  . . . . . . . . . . . . . . . 6-11
6. 7.
Disassembly and Replacement. . . . 6-15
7.
IMAGE PROCESSING
7. 1.
General Description  . . . . . . . . . . . . .  7-1
7. 2.
Image Processing Circuit  . . . . . . . . .  7-2
7. 3.
SLG Board (PWA-F-SLG-340) . . . . .  7-4
7. 4.
PLG Board (PWA-F-PLG-340) . . . . .  7-7
7. 5.
Scanning Section  . . . . . . . . . . . . . . .  7-8
7. 6.
Writing Section . . . . . . . . . . . . . . . . .  7-8
8.
LASER & OPTICAL UNIT
8. 1.
General Description  . . . . . . . . . . . . .  8-1
8. 2.
Structure . . . . . . . . . . . . . . . . . . . . . .  8-3
8. 3.
Laser Diode  . . . . . . . . . . . . . . . . . . .  8-7
8. 4.
Disassembly and Replacement  . . . .  8-8
9.
PAPER FEEDING SECTION
9. 1.
General Description  . . . . . . . . . . . . .  9-1
9. 2.
Functions  . . . . . . . . . . . . . . . . . . . . .  9-1
9. 3.
Operation  . . . . . . . . . . . . . . . . . . . . .  9-4
9. 4.
Drive Circuit for Tray-up Motor . . . .  9-10
9. 5.
Disassembly and Replacement  . . .  9-11
10. PROCESS SECTION
10. 1.
Construction . . . . . . . . . . . . . . . . . .  10-1
10. 2.
Functions  . . . . . . . . . . . . . . . . . . . .  10-2
10. 3.
Charger Wire Cleaner 
Operational Circuit  . . . . . . . . . . . . .  10-3
10. 4.
High-voltage Transformer 
Output Control Circuit . . . . . . . . . . .  10-4
10. 5.
Surface Potential Sensor  . . . . . . . .  10-6
10. 6.
Disassembly and Replacement  . . .  10-8
11. DRUM/CLEANER UNIT
11. 1.
Construction . . . . . . . . . . . . . . . . . .  11-1
11. 2.
Functions  . . . . . . . . . . . . . . . . . . . .  11-2
11. 3.
Drum Temperature Detection 
Circuit . . . . . . . . . . . . . . . . . . . . . . .  11-2
11. 4.
Image Quality Control . . . . . . . . . . .  11-3
11. 5.
Disassembly and Replacement  . . .  11-6
12. DEVELOPER UNIT
12. 1.
Construction . . . . . . . . . . . . . . . . . .  12-1
12. 2.
Functions  . . . . . . . . . . . . . . . . . . . .  12-2
12. 3.
Developer Unit Drive. . . . . . . . . . . .  12-4
12. 4.
Motor Drive Circuit  . . . . . . . . . . . . .  12-6
12. 5.
Auto-toner Sensor Circuit . . . . . . . .  12-9
12. 6.
Disassembly and Replacement  . .  12-12
13. TRANSFER/TRANSPORT UNIT
13. 1.
General Description  . . . . . . . . . . . .  13-1
13. 2.
Operation  . . . . . . . . . . . . . . . . . . . .  13-1
13. 3.
Functions  . . . . . . . . . . . . . . . . . . . .  13-2
13. 4.
Disassembly and Replacement  . . .  13-4
Page of 5
Display

Download Sharp AR-810 (serv.man5) Service Manual (Repair Manual)

Here you can read online and download Sharp AR-810 (serv.man5) Service Manual in PDF. AR-810 (serv.man5) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-810 (serv.man5) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.