Read Sharp AR-810 (serv.man14) Service Manual online
AR-651/810 PROCESS SECTION 10 - 10
45
A
[D] Ozone filter
(1) Remove 1 screw and pull out the ozone filter
at the exit side.
[C] Discharge lamp
(1) Remove the main charger and cleaner unit.
(2) Disconnect 1 connector, remove 1 screw
and take off the discharge lamp.
Connector
(3) Disconnect 1 connector, remove 2 screws and
take off the wire cleaner drive motor with the
bracket.
(4) Remove 2 screws and take off the motor.
Wire cleaner drive motor
(5) Disconnect 2 connectors, remove 1 screw and
take off the wire cleaner stop position switch.
Note: When installing the switch, fix it with pushing it
toward the arrow
훽
. Also, pay attention to the
color of the harness when connecting the
connectors to the terminals, and then bend the
terminals 45 degrees.
Connector
Black
Purple
Click on the first or last page to see other AR-810 (serv.man14) service manuals if exist.