Read Sharp AR-651 (serv.man17) Service Manual online
AR-651/810 FUSER UNIT 14 - 19
[I] Fuser roller
(1) Loosen 2 pressure screws completely.
(2) Remove 2 screws and take off the fuser unit
cover (rear).
Fuser unit
cover (rear)
cover (rear)
(3) Disconnect each connector, remove each screw
and take off the thermistor and thermostat.
Notes: 1. When installing the thermistor and
thermostat, be careful not to deform them
and plate to which they are installed.
2. Adjust the gap between the thermostat (2
points) and fuser roller to the range
between 2~2.5mm.
(2) Remove 2 screws and take off the stay.
2.0~2.5mm
Click on the first or last page to see other AR-651 (serv.man17) service manuals if exist.