Read Sharp AR-235 (serv.man9) Service Manual online
AR-235/275 SIMULATION - 23
Operation/procedure (Pattern 1)
Input the set value with the 10-key and press the [OK] key.
If a model different from CPM setup (22cpm or 27cpm) of BOOT is set,
a system error will occur after canceling the simulation.
a system error will occur after canceling the simulation.
Operation/procedure (Pattern 1)
Input the set value with the 10-key and press the [OK] key.
This setup varies in connection with SIM 26-6 (Destination setup).
Operation/procedure (Pattern 1)
Input the set value with the 10-key and press the [OK] key.
Operation/procedure
Current memory is displayed in PRESENT column.
Enter a value (max. 8 digits) with the 10-key, and press the [OK] key.
The input number is displayed instead of "NEW".
The set value is stored and "PRESENT" of LCD is revised.
Operation/procedure
The operating conditions of sensors and detectors in the different sec-
tions than the paper feed section of the machine are displayed. The
active sensors and detectors are highlighted.
tions than the paper feed section of the machine are displayed. The
active sensors and detectors are highlighted.
26-57
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the model code.
Item
Operation
Display items
Setting range
Default
1:AR-235
1-10
1
2:AR-255S
3:AR-255P
4:AR-255F
5:AR-255FP
6:AR-275
7:AR-N275
8:DM-2305
9:DM-2515
10:DM-2705
26-60
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set enable/disable of the FAX mode key when
FAX is not installed. (When FAX is installed, the FAX
mode is enabled regardless of this setup.)
FAX is not installed. (When FAX is installed, the FAX
mode is enabled regardless of this setup.)
Item
Operation
Display
items
Content
Setting
range
Default
JAPAN,
SEC, SECL,
SUK, SCA
Others
0:ON
Effective (The
message with FAX
uninstalled is
displayed.)
message with FAX
uninstalled is
displayed.)
0-1
0
1
1:OFF
Disable (Error Beep)
27
27-1
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set PC/MODEM communication trouble (U7-
00) detection Yes/No.
00) detection Yes/No.
Section
Communication (RIC/MODEM)
Item
SpecificationsOperation mode
(Common)
Sim26-57 MACHINE
MACHINE CODE 1
(1:AR-235
2:AR-255S
1/5 [ 1-10]
1
Sim26-60 FAX KEY
FAX KEY SETTING 0
(0:ON 1:OFF)
[ 0- 1]
0
Display
items
Content
Setting
range
Default
0:OFF
In case of the communication
trouble, U7-00 is not displayed.
trouble, U7-00 is not displayed.
0-1
0
1:ON
In case of the communication
trouble, U7-00 is displayed.
trouble, U7-00 is displayed.
27-5
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to enter the TAG No. of the copier.
Item
Data
30
30-1
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of sensors and detectors
in the sections other than the paper feed section of the
copier and the related circuit. (The operation of
sensors and detectors can be monitored with the
LCD.)
in the sections other than the paper feed section of the
copier and the related circuit. (The operation of
sensors and detectors can be monitored with the
LCD.)
Section
Others
Item
Operation
PPD1H
PS paper detection 1 sensor
PPD1L
PS paper detection 2 sensor
PPD2
Duplex sensor
POD1
1st paper exit paper out sensor
DVCH
Developing cartridge detection sensor
DRST
Drum intial detection sensor
DSWR1
Interlock switch (side door)
SFTHP
Shifter home position sensor
POD2
2nd paper exit paper out sensor
TOPF
2nd paper exit full detection sensor
DSWR0
2nd paper exit cover open/close detection sensor
LOEMP
1st paper exit empty detection sensor
Sim27-1 U7-00 SET.
DISABLE U7-00 0
(0:OFF 1:ON)
[ 0- 1]
0
Sim 27-5 TAG# SET.
TAG# SETTING
PRESENT :
NEW :
12345678
Sim30-1 MAIN SENSOR
PPD1H PPD1L
PPD2
POD1 DVCH DRST
DSWR1
SFTHP
POD2
TOPF DSWR0 LOEMP
Click on the first or last page to see other AR-235 (serv.man9) service manuals if exist.