Read Sharp AR-235 (serv.man9) Service Manual online
AR-235/275 SIMULATION - 21
After canceling the simulation, if OK, the scanner function is enable; if
NG, the scanner function is disabled.
NG, the scanner function is disabled.
This setting must be reset after the simulation cancel.
Note: Executable only when the SCANNER is installed.
Operation/procedure
The current setup is displayed with ON or OFF.
Enter an input (20 digits) of the E-MAIL RIC soft key and press the
[OK] key, and the collating result is displayed with OK or NG.
[OK] key, and the collating result is displayed with OK or NG.
After canceling the simulation, if OK, the E-MAIL RIC function is
enable; if NG, the E-MAIL RIC function is disabled.
enable; if NG, the E-MAIL RIC function is disabled.
This setting must be reset after the simulation cancel.
Note: Executable only when the PCL/NIC is installed.
Operation/procedure
The current setup is displayed with ON or OFF.
Enter an input (20 digits) of the PS expansion kit soft key and press the
[OK] key, and the collating result is displayed with OK or NG.
[OK] key, and the collating result is displayed with OK or NG.
After canceling the simulation, if OK, the PS expansion kit function is
enable; if NG, the PS expansion kit function is disabled.
enable; if NG, the PS expansion kit function is disabled.
This setting must be reset after the simulation cancel.
Note: Executable only when the PCL/PS3 is installed.
Operation/procedure (Pattern 1)
Input the set value with the 10-key and press the [OK] key.
Operation/procedure (Pattern 1)
Input the set value with the 10-key and press the [OK] key.
Note: Executable only when the finisher is not installed.
Operation/procedure (Pattern 1)
Select the language to be used according to the table below.
This setup varies in connection with SIM 26-6 (Destination setup).
Operation/procedure (Pattern 1)
Input the set value with the 10-key and press the [OK] key.
This setup varies in connection with SIM 26-6 (Destination setup).
26-12
Function
(Purpose)
(Purpose)
Used to input the Software Key for E-MAIL RIC.
(Initial screen)
(In case of OK)
(In case of NG)
26-14
Function
(Purpose)
(Purpose)
Used to input the Software Key for the PS extention kit.
(Initial screen)
(In case of OK)
(In case of NG)
26-18
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set enable/disable of toner save operation.
Item
SpecificationsOperation mode (Common)
Display
items
Content
Setting
range
Default
0:OFF
Disable
0-1
0
1:ON
Enable
Note
Setup is allowed only for Japan and UK.
Sim26-12 E-MAIL KEY
E-MAIL KEY ON
----------
----------
Sim26-12 E-MAIL KEY
E-MAIL KEY OK
----------
----------
Sim26-12 E-MAIL KEY
E-MAIL KEY NG
----------
----------
Sim26-14 PS KIT KEY
PS KIT KEY ON
----------
----------
Sim26-14 PS KIT KEY
PS KIT KEY OK
----------
----------
Sim26-14 PS KIT KEY
PS KIT KEY NG
----------
----------
Sim26-18 TONER SAVE
TONER SAVE MODE 0
(0:OFF 1:ON)
[ 0- 1]
0
26-20
Function
(Purpose)
(Purpose)
Used to set the job separator paper exit mode.
Display
items
Content
Setting
range
Default
0:OFF
Paper is discharged to No. 1
paper exit port.
paper exit port.
0-1
0
1:ON
Used to discharge paper to the
job separator tray (No. 2 paper
exit port).
job separator tray (No. 2 paper
exit port).
26-22
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the specification (language display) for the
destination.
destination.
Item
Specifications
Display items
Setting
range
Default
0:JAPANESE
10:TURKISH
0-19
0
1:ENG.US
11:GREEK
2:ENG.UK
12:POLISH
3:FRENCH
13:HUNGARIAN
4:GERMAN
14:CZECHOSLOVAK
5:ITALY
15:RUSSIAN
6:DUTCH
16:FINNISH
7:SWEDISH
17:NORWEGIAN
8:SPANISH
18:DANISH
9:PORTUGUESE
19:CHINESE
26-30
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the operation mode for CE mark.
Item
SpecificationsOperation mode (Common)
Sim26-20 JOBSEP OUT
JOBSEP OUT MODE 0
(0:OFF 1:ON)
[ 0- 1]
0
Sim26-22 LANGUAGE
LANGUAGE 0
(0:JAPANESE
1:ENG.US 2:ENG.UK
1/3 [ 0- 19]
0
Sim26-30 CE MARK
CE MARK CONTROL 0
(0:OFF 1:ON)
[ 0- 1]
0
Click on the first or last page to see other AR-235 (serv.man9) service manuals if exist.