Read Sharp AR-235 (serv.man9) Service Manual online
AR-235/275 SIMULATION - 20
A4/LT (8.5" x 11") detection enable/disable setup
In the inch series, Letter is detected as A4; in the AB series, A4 is detected as Letter.
Detection size when A4/LT (8.5" x 11") document/paper is used.
Operation/procedure (Pattern 1)
Set the auditor.
Operation/procedure (Pattern 2)
Used to set the count up number (1 or 2) when an A3/WLT paper
passes through.
passes through.
For the drum counter and the developer counter, double count is
employed unconditionally.
employed unconditionally.
(Target counter selection)
Used to set the count up number of the selected counter.
Operation/procedure (Pattern 1)
Select the destination.
Operation/procedure
The current setup is displayed with ON or OFF.
Enter an input (20 digits) of the NETWORK soft key and press the [OK]
key, and the collating result is displayed with OK or NG.
key, and the collating result is displayed with OK or NG.
When "0" is entered to the soft key, it is treated as a trial setup.
Set value
Setup
Remarks
0
Detection invalid
Default
1
Detection valid
Employed unit
Destination
Document size
Set value
0
(Invalid)
1
(Valid)
Document
Document
table/SPF
table/SPF
AB series
A4
A4
LT (8.5” x 11”)
LT (8.5” x 11”)
A4
LT (8.5” x 11”)
Inch series
A4
LT (8.5” x 11”)
A4
LT (8.5” x 11”)
LT (8.5” x 11”)
A4
Paper
Machine paper
feed cassette
feed cassette
All destinations
–
Set with key operations.
Manual paper
feed tray
feed tray
All destinations
–
Regardless of the simulation
setup.
26-3
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the specifications of the auditor. Setting
must be made depending on the use condition of the
auditor.
must be made depending on the use condition of the
auditor.
Section
Auditor
Item
Specifications
Display
items
Content
Setting
range
Default
0:P10
Built-in auditor mode
0-2
0
1:VENDOR
Coin vendor mode
2:OTHER
Others
26-5
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the count mode of the total counter and the
maintenance counter.
maintenance counter.
Item
SpecificationsCounter
1:TOTAL COUNTER
Total
2:MAINTE COUNTER
Maintenance
1:SINGLE COUNT
Single count
2:DOUBLE COUNT
Double count
Setting range
1-2
Default
2
(Initial screen)
(Input screen)
Sim26-3 AUDITOR SET
AUDITOR 0
(0:P10 1:VENDOR
2:OTHER)
[ 0- 2]
0
Sim26-5 COUNT MODE
1:TOTAL COUNTER 1
2:MAINTE COUNTER 1
2
Sim26-5 COUNT MODE
2:MAINTE COUNTER 1
(1:SINGLE COUNT
2:DOUBLE COUNT)
[ 1- 2]
1
26-6
Purpose
Setting
Function (Purpose)
Used to set the specifications depending on
the destination.
the destination.
Item
SpecificationsDes
tination
Display
items
Content
Setting
range
Default
0:JAPAN
Japan
0-13
0
1:SEC
SEC
2:SECL
SECL
3:SEEG
SEEG
4:SUK
SUK
5:SCA
SCA
6:SEF
SEF
7:INEG
EX inch series
8:ABEG
EX AB series
9:INEF
EX inch series (FC)
10:ABEF
EX AB series (FC)
11:CHINESE
China
12:TAIPEI
Taiwan
13:SEEG2
SEEG2
26-10
Function
(Purpose)
(Purpose)
Used to enter the Software Key for the Network
Scanner. (Setup is allowed only when the PCL board is
installed.
Scanner. (Setup is allowed only when the PCL board is
installed.
(Initial screen)
(In case of OK)
(In case of NG)
Sim26-6 DESTINATION
DESTINATION 0
(0:JAPAN 1:SEC
2:SECL 3:SEEG 4:SUK
1/3 [ 0- 13]
0
Sim26-10 SCANNERKEY
SCANNER KEY ON
----------
----------
Sim26-10 SCANNERKEY
SCANNER KEY OK
----------
----------
Sim26-10 SCANNERKEY
SCANNER KEY NG
----------
Click on the first or last page to see other AR-235 (serv.man9) service manuals if exist.