Read Sharp AR-235 (serv.man9) Service Manual online
AR-235/275 SIMULATION - 5
3. Details
Operation/procedure (Pattern 10)
Enter the number, set the magnification ratio and the original size and
press the [OK] key, and the scanner unit will operate in a speed corre-
sponding to the setup.
press the [OK] key, and the scanner unit will operate in a speed corre-
sponding to the setup.
The fixed magnification ratio (25% to 400%) can be changed in 11
steps with [
steps with [
↑
] [
↓
] keys.
(AB series)
→
25
→
50
→
70
→
81
→
86
→
100
→
115
→
122
→
141
→
200
→
400
(Inch series) 25
→
50
→
64
→
77
→
95
→
100
→
121
→
129
→
141
→
200
→
400
The scan counter is displayed during execution.
46
2
Used to adjust the copy exposure level.
7
Used to adjust individually the copy exposure
level. (Super photo)
level. (Super photo)
9
Used to adjust individually the copy exposure
level. (Character)
level. (Character)
10
Used to adjust individually the copy exposure
level. (Character/Photo)
level. (Character/Photo)
11
Used to adjust individually the copy exposure
level. (Photo)
level. (Photo)
12
FAX exposure level adjustment (batch)
13 to
16
FAX exposure level adjustment (individual)
18
Used to adjust the copy contrast. (Inclination)
19
Used to change the image quality in the exposure
mode.
mode.
20
Used to correct SPF exprosure.
30
Used to set the AE limit.
48
1
Used to adjust the copy magnification ratio (main
scanning direction, sub scanning direction).
scanning direction, sub scanning direction).
2
Used to adjust the scanner magnification ratio
(main/sub scanning direction).
(main/sub scanning direction).
3
Used to adjust the lead edge/sub scan
magnification ratio.
magnification ratio.
8
FAX magnification ratio adjustment (read)
9
FAX magnification ratio adjustment (print)
10
FAX auto reduction magnification ratio (print).
50
1
Used to adjust the copy lead edge position.
5
Used to adjust the print image position (top
margin) on the print paper in the print mode.
margin) on the print paper in the print mode.
6
Used to adjust the print image position (top
margin) on print paper in the copy mode. (SPF/
RSPF)
margin) on print paper in the copy mode. (SPF/
RSPF)
8
FAX lead edge adjustment (read)
9
FAX lead edge adjustment (print)
10
Used to adjust the print image center position.
(Adjustment can be made for each paper feed
section.)
(Adjustment can be made for each paper feed
section.)
12
Used to adjust the print image center position.
(Adjustment can be made for each document
mode.)
(Adjustment can be made for each document
mode.)
51
1
Used to adjust the OPC drum separation pawl ON
time.
time.
2
Used to adjust the contact pressure of paper onto
the resist roller in each section (copier paper feed
section, duplex paper feed section, SPF paper
feed section). (When the print image position
varies greatly for the paper or when a lot of paper
jam troubles occur, the adjustment is required.)
the resist roller in each section (copier paper feed
section, duplex paper feed section, SPF paper
feed section). (When the print image position
varies greatly for the paper or when a lot of paper
jam troubles occur, the adjustment is required.)
8
Used to set to disable the operation of the
separation pawl of the photoconductor drum.
separation pawl of the photoconductor drum.
61
1
Used to test the operation of the LSU.
63
1
Used to check the result of shading correction.
(The shading correction data are displayed.)
(The shading correction data are displayed.)
7
Used to adjust the SPF white correction start pixel
position automatically.
This adjustment is performed after the lens unit is
replaced.
position automatically.
This adjustment is performed after the lens unit is
replaced.
64
1
Used to check the operation of the printer function
(auto print operation).
(auto print operation).
65
5
Used to check the operation panel.
Code
Function
Main
Sub
66
1
FAX related soft SW setting
2
Initial set for the value of the FAX soft SW
3
FAX PWB memory check
4
Signal send mode
6
Printing the confidential password
7
Image data print
8
Voice Message send
10
Image data memory clear
11
300bps signals send
13
Send test and adjustment of the dial pulse and
DTMF signal.
DTMF signal.
17
DTMF signal send
21
FAX information print
22
Handset sound volume adjustment
30
TEL/LIU state change recognition
32
Receive data check
34
Communication time measurement display
37
Speaker sound volume adjustment
38
Time setting/check
41
CI signal check
50
FAST SRAM clear
51
Signal detection check
52
Pseudo-ringer check
53
SRAM backup
67
11
Used to set the Select-IN signal.
14
Used to check write/comparison of flash programs.
17
Used to clear NVRAM.
18
Used to clear the data area for FLASH ROM
Network Scanner Application.
Network Scanner Application.
20
Used to check the network connection when a
scanner option is installed.
scanner option is installed.
1
1-1
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of the scanner unit and its
control circuit.
control circuit.
Section
Optical (Image scanning)
Item
Operation
(Initial screen)
(Input/Selection screen) (Executing screen)
Code
Function
Main
Sub
Sim1-1 SCAN CHECK
115% A3
100%
86%
ZOOM <100%>
0
Sim1-1 SCAN CHECK
115% A3
100%
86%
ZOOM <100%> EXEC
Sim1-1 SCAN CHECK
115% A3
100%
86%
ZOOM <100%>
EXEC
Click on the first or last page to see other AR-235 (serv.man9) service manuals if exist.