Read Sharp AL-1622 (serv.man11) Service Manual online
AL-1611/AL-1622
SIMULATIONS
8 – 2
4. CONTENTS OF SIMULATIONS
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
1
1
Mirror unit operation check
Used to execute scanning at the speed corresponding to the set magnification
ratio.
ratio.
100%
50 ~ 200%
2
Optical system sensor oper-
ation check
ation check
Used to check MHPS (Mirror home position sensor) ON/OFF state with the
LED on the operation panel.
LED on the operation panel.
2
1
SPF aging
<Only AL-1622>
Used to perform SPF document transport.
The paper size is not detected. (Excluding postcards, extra large sheet of 1m
or greater.)
With SPF installed: Single transport operation
With RSPF installed: Duplex transport operation
The paper size is not detected. (Excluding postcards, extra large sheet of 1m
or greater.)
With SPF installed: Single transport operation
With RSPF installed: Duplex transport operation
100%
50 ~ 200%
2
SPF sensor operation check
<Only AL-1622>
Used to check sensors in SPF with the LED on the operation panel.
3
SPF motor forward rotation
operation check
<Only AL-1622>
operation check
<Only AL-1622>
Used to rotate the SPF motor forward for 10 sec.
4
SPF motor reverse rotation
operation check
operation check
<Only AL-1622>
Used to rotate the SPF motor reversely for 10 sec.
8
SPF paper feed solenoid
operation check
operation check
<Only AL-1622>
Used to drive the SPF paper feed solenoid (PSOL) at the cycle of 500 msec
ON and 500 msec OFF 20 times.
ON and 500 msec OFF 20 times.
9
RSPF reverse solenoid
operation check
<Not Used>
operation check
<Not Used>
Used to drive the RSPF reverse solenoid (RSOL) at the cycle of 500 msec ON
and 500 msec OFF 20 times.
and 500 msec OFF 20 times.
10
RSPF paper exit gate sole-
noid operation check
noid operation check
<Not Used>
Used to drive the RSPF paper exit gate solenoid (GSOL) at the cycle of 500
msec ON and 500 msec OFF 20 times.
msec ON and 500 msec OFF 20 times.
11
SPF PS release solenoid
operation check
operation check
<Only AL-1622>
Used to drive the SPF PS release solenoid at the cycle of 500 msec ON and
500 msec OFF 20 times.
500 msec OFF 20 times.
Key operation
Display
Changing the magnification ratio:
Fixed magnification ratio key
ZOOM UP KEY, ZOOM DOWN
KEY
KEY
Set magnification ratio:
Fixed magnification ratio LED
ZOOM LED
Display
<Lighting when the sensor is ON>
MHPS: Paper empty LED
MHPS: Paper empty LED
Key operation
Display
Changing the magnification ratio:
Fixed magnification ratio key
ZOOM UP KEY, ZOOM DOWN
KEY
KEY
Set magnification ratio:
Fixed magnification ratio LED
ZOOM LED
Display
<Lighting at sensor ON>
PW1: JAM LED
PW2: Paper empty LED
PW3: Machine position JAM LED
PW4: SPF JAM LED
PL1: Manual paper feed tray select LED
PL2: 2nd tray position JAM LED
P-IN: SPF select LED
SPF COVER OPEN: Main cassette select LED
PW1: JAM LED
PW2: Paper empty LED
PW3: Machine position JAM LED
PW4: SPF JAM LED
PL1: Manual paper feed tray select LED
PL2: 2nd tray position JAM LED
P-IN: SPF select LED
SPF COVER OPEN: Main cassette select LED
Click on the first or last page to see other AL-1622 (serv.man11) service manuals if exist.