AL-1622 (serv.man11). Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 9

AL-1611/AL-1622

SIMULATIONS

8 – 9

26

50

Black-white reversion func-
tion setup

The current setup of black-white reversion is displayed with the following num-
bers. After entering the set value, press the start key to store the set value.

0

0  ~  1

51

Sort/Group copy temporary 
stop function setup 

Used to set whether temporary stop for every 250-sheet print (150-sheet print 
when the job separator is installed) is made or not during copying with the 
sort/group function. The current setup is displayed with the following numbers. 
After entering the set value, press the start key to store the set value.

1

0  ~  1

30

1

Machine sensor operation 
check

Used to check the sensors in the machine transport system with LED on the 
operation panel.

41

2

OC document sensor adjust-
ment 
<Not Used>

Used to read the document sensor input value with paper and perform the 
sensor detection level adjustment. For the adjustment procedure of the docu-
ment sensor input value, refer to the previous descriptions.

3

Document sensor light 
reception level display 

Used to display the light reception level and the detection level of the docu-
ment sensor. (The sensor level adjusted with SIM 41-2 is displayed.)

42

1

Developing counter clear

Used to clear the Developing counter. 

*

2

43

1

Fusing temperature setting

Used to display the current setting of the fusing temperature at right. After 
selecting the fusing temperature with the magnification ratio display key, press 
the start key, and the set value is stored. The set range is 155 ~ 180°C. Use 
the magnification ratio key to adjust the value by 5°C.

170

155 ~ 180

46

1

Copy density level adjust-
ment

After completion of warmup, shading is performed and the currently set copy 
density level is displayed. For the adjustment procedure, refer to the previous 
descriptions.

48

1 ~ 99

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

Key operation/Display

0: Black-white reversion function enabled

1: Black-white reversion function disabled

Key operation/Display

0: Does not stop.

1: Stops.

Display

<Lighting at sensor ON>

Paper entry sensor: Machine position JAM LED
Paper exit sensor: JAM LED

No. 2 cassette transport sensor: No. 2 cassette position LED

Key operation

Display

Light reception/Detection 
level select: Magnification 
ratio display key

Sensor select: Auto 
magnification ratio select 
key

Display at the 3rd digit

"A": Light reception level display

"b": Document detection level display
Sensor A: A3 (11 x 17) document size LED

Sensor B: A4 (8 1/2 x 14) document size LED

Sensor C: A4R (8 1/2 x 11) document size 
LED
Sensor D: B4 (8 1/2 x 5 1/2) document size 
LED

Key operation

Fusing temperature select: Magnification ratio display key

Key operation

Display

Mode select: 
Exposure mode select key 

Copy density level: 
Copy quantity keys

<LED lighting at each mode selection>

Auto mode: AUTO LED
Manual mode: MANUAL LED

Photo mode: PHOTO LED

Toner save mode: MANUAL + PHOTO LED
AETS mode: AUTO + PHOTO LED