AL-1622 (serv.man11). Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 7

AL-1611/AL-1622

SIMULATIONS

8 – 7

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

26

1

Option switch display

Used to display the installed option on the operation panel. (The LED corre-
sponding to the installed option is lighted.)

3

Auditor setting

Used to display the current auditor setting with the numbers at right. After 
entering the set value, press the start key, and the set value is stored.

0

0  ~  2

5

Counter mode setting

Used to set the print counter mode in A3. 
Used to display the currently set counter value with the numbers at right. After 
entering the set value, press the start key, and the set value is stored.

0

0  ~  3

6

Destination setting

Used to display the current destination setting with the numbers at right. 
After entering the set value, press the start key, and the set value is stored.

8

0  ~  13

Key operation

Display

Display select: 

Magnification 
ratio display key

<Lighting with an option installed>

When "A" is displayed:
Shifter: Paper empty LED

Job separator: JAM LED

SPF: SPF select LED
RSPF: SPF JAM LED

Duplex mode: Main cassette select LED

Simplex mode: Multi manual paper feed select LED
MCU JMPER1: Top of the magnification ratio display

MCU JMPER2: 2nd of the magnification ratio display

MCU JMPER3: 3rd of the magnification ratio display
MCU JMPER7: 4th of the magnification ratio display

MCU JMPER7: 5th of the magnification ratio display

MCU JMPER7: 6th of the magnification ratio display
MCU JMPER7: 7th of the magnification ratio display

MCU JMPER8: Bottom of the magnification ratio display

When "b" is displayed: 
Cassette (2nd step): No. 2 cassette select LED

Cassette (3rd step): No. 3 cassette select LED

Cassette (4th step): No. 4 cassette select LED
Memory installed: Paper empty LED

FAX: JAM LED

Printer: Main body JAM LED
ERDH: Main cassette select LED

16CPM: SPF JAM LED

20CPM: SPF select LED
Document sensor: Auto paper select LED

Key operation/Display

0: Built-in auditor
1: Coin vendor

2: Others

Key operation/Display

0: Total/Developer = 2 counts

1: Total/Developer = 1 count
2: Total/Developer = 2 counts

3: Total/Developer = 1 count

Maintenance = 2 counts

Maintenance = 2 counts
Maintenance = 1 count

Maintenance = 1 count

Key operation/Display

0: Japan
1: USA (Inch series)

2: Canada (Inch series)

3: Germany 1 (AB series)
4: UK (AB series)

5: Not used

6: France (AB series)

7: EX inch series

  8: X AB series
  9: X inch series (FC conformity)

10: EX AB series (FC conformity)

      (Australia, Newzealand)
11: China (AB series)

12: Taiwan (AB series)

13: Germany 2 (AB series)