Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-V602 DISASSEMBLY AND ASSEMBLY
6 – 6
5. KEY PWB
1 ) Disconnect 1 connector. Unscrew 2pcs of screws (M3 x 4 (silver)) and remove the Key PWB assy.
CAUTION
NOTE FOR ASSEMBLY
n
Since the screws used for this tool are shorter than other screws, use enough care for handling. If other screws may be used, the LED PWB
may be damaged to breakdown.
SCREW TIGHTENING TORQUE
n
0.55 - 0.65N•m
6. AC RELAY PWB
1 ) Disconnect 5 connectors. Unscrew 7pcs of screws (M3 x 8S/SW (silver)), and remove the AC relay PWB.
CAUTION
SCREW TIGHTENING TORQUE
n
0.55 - 0.65N•m
Locating points
Locating points
Screw x 2
Screw x 7
Connector x 5
