Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-V602 DISASSEMBLY AND ASSEMBLY
6 – 5
MEMO
n
When replacing the rear cover assembly, reassemble the rear cover assembly in the following procedures.
1 ) Insert the positioning section of the rear cover R into the positioning hole in the rear cover L, and fix with four screws
A (M3 x 8B, Silver).
2 ) Attach the four corner fixing plates, and fix them with 8 screws
B (M4 x 6, Silver).
CAUTION
NOTE FOR ASSEMBLY
n
The connected part should be properly seated. (not lifted)
SCREW TIGHTENING TORQUE
n
Screw
A: 0.55 - 0.65N•m
n
Screw
B: 0.7 - 0.9N•m
Locating points
Locating points
Locating points
Locating points
A
Screw
x 4
B
Screw
x 8
Corner fixing plate x 4
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.