Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 5. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
PN-V602 FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
5 – 25
5 - 3. SUPPLEMENTARY DESCRIPTIONS
■ SETTING THE PRINTER PORT I/O ADDRESS TO 378
<FOR WINDOWS XP>
1 ) Open the system of the control panel.
2 ) Open the hardware tag, and click the “Device manager” button.
3 ) Click “+” mark on the left of “Port (COM/LPT)”
Check to confirm that there is “ECP printer port (LPT1).”
4 ) Open the property of the printer port (LPT1), and open the resource tag.
5 ) Uncheck “Use automatic settings” and select “Current configuration.”
(If “I/O range” is already “0378 - 037F,” there is no need to change.)
<FOR WINDOWS VISTA>
1 ) Open the system of the Control Panel.
2 ) Open the System and Maintenance, and click the Device Manager.
3 ) Click the [Continue] button in User Account Control Dialog.
4 ) Click “+” mark on the left of “Port (COM/LPT)”.
Check to confirm that there is “ECP printer port (LPT1).”
5 ) Open the property of the printer port (LPT1), and open the resource tag.
6 ) Uncheck “Use automatic settings” and select “Current configuration.”
(If “I/O range” is already “0378 - 037F,” there is no need to change.)
Microsoft Windows
User Account Control
Windows needs your permission to continue
If you started this action, continue.
Microsoft Management Console
[Continue]
[Cancel]
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.