Read Sharp PN-S525 (serv.man3) Service Manual online
PN-S525
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 2
(3) Other
terminals
[PC/AV audio output terminals]
• Audio from the equipment connected to the AV audio input terminals
or PC audio input terminal is output. Connect to the audio input termi-
nals of the connected equipment using a commercially available
nals of the connected equipment using a commercially available
audio cable (RCA).
• The audio output varies depending on the input mode selection.
• The volume level can be adjusted using the volume adjustment.
• Selecting FIXED of “AUDIO OUTPUT” from the OPTION menu fixes
the volume of sound output from the audio output terminals.
• Audio signals output from the PC/AV audio output terminals cannot
be adjusted using the AUDIO menu.
[PC/AV output terminals]
Video signals from PC1 and AV1 can be output to external device.
Use this terminal when you connect multiple monitors in a daisy chain
Use this terminal when you connect multiple monitors in a daisy chain
via DVI cable (commercially available).
Outputting images encoded with HDCP requires an HDCP compati-
ble external device.
Images cannot be output in the following situations:
Images cannot be output in the following situations:
- In PC2/AV2 input mode
- When PIP SOURCE in the PIP/PbyP Menu is set to PC2
HDMI or AV2 HDMI
HDMI or AV2 HDMI
[RS-232C input/output terminals]
You can control the monitor from a PC by connecting a commercially
available RS-232 straight cable between this terminal and the PC.
available RS-232 straight cable between this terminal and the PC.
[LAN terminal]
You can control the monitor from a PC on a network by connecting a
commercially available LAN cable between this terminal and a net-
commercially available LAN cable between this terminal and a net-
work.
1-2. CONNECTING EXTERNAL SPEAKERS
Be sure to use external speakers with an impedance of 6
Ω and a rated
input of at least 7W.
1) While pushing the tab, insert the tip of the cable.
2) Release the tab.
Note:
• Be sure to connect the
+
and
−
terminals and the left and right
speakers properly.
• Avoid short circuiting the
+
and
−
terminals.
1-3. CONNECTING THE POWER CORD
1) Turn off the main power switch.
2) Plug the power cord (supplied) into the AC input terminal.
3) Plug the power cord (supplied) into the AC power outlet.
Caution:
Do not use a power cord other than the one supplied with the monitor.
1-4. CONNECTING MULTIPLE MONITORS
You can connect multiple monitors (up to 5 monitors) in a daisy chain by
using the PC1/AV1 input terminals and PC/AV output terminals of this
monitor.
monitor.
[Connection example]
Note:
• The length of the signal cables or surrounding environment may
affect the image quality.
• The screen may not display properly when using terminals other
than PC1/AV1 for the input mode. In this case, turn off the power to
all the monitors connected in a daisy chain and then turn the power
on again.
on again.
• When connecting monitors in a daisy chain set AUTO INPUT
CHANGE to OFF.
1
2
AC input terminal
Main power switch
For power
outlet
outlet
Power cord (Supplied)
1
2
3
First monitor
Second monitor
PC/AV output
terminal
terminal
PC1/AV1 input terminals
Digital signal (DVI) cables
(commercially available)
(commercially available)
To PC digital RGB output terminal
shows the signal flow
Click on the first or last page to see other PN-S525 (serv.man3) service manuals if exist.