PN-S525 (serv.man3) - Sharp Monitor Service Manual (repair manual). Page 7

Read Sharp PN-S525 (serv.man3) Service Manual online

PN-S525
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 5
 Installing the batteries
1) Press the cover gently and slide it in the direction of the arrow.
2) See the instructions in the compartment and put in the supplied bat-
teries (R-6 ("AA" size) 
×
 2) with their plus (+) and minus (-) sides ori-
ented correctly.
3) Close the cover.
Note:
• When the batteries become exhausted replace them with new
(commercially available) batteries earlier than specified.
•  The supplied batteries (R-6 (“AA” size) 
×
 2) may become 
exhausted quickly depending on how they are stored.
•  If you will not use the remote control for a long time, remove the
batteries.
•  Use manganese or alkaline batteries only.
 Remote control operation range
The operation range of the remote control unit is approx. 16.4 feet (5m)
at an angle of approx 10° from the centre to the top/bottom/right/left of
the remote control sensor.
Caution:
•  Do not expose the remote control unit to shock by dropping or step-
ping on it. This could lead to a malfunction.
•  Do not expose the remote control unit to liquids, and do not place it
in an area with high humidity.
•  The remote control unit may not work properly if the remote control
sensor is under direct sunlight or strong lighting. 
•  Objects between the remote control unit and the remote control
sensor may prevent proper operation.
•  Replace the batteries when they run low as this may shorten the
remote control’s operation range.
•  If a fluorescent light is illuminated near the remote control unit, it
may interfere with proper operation.
•  Do not use it with the remote control of other equipment such as air
conditioner, stereo components, etc.
 Dual screen display
You can display the screens of the PC input signal and AV input signal
simultaneously.
Set this function with “PIP MODES” in the PIP/PbyP menu.
* The currently selected input signal is displayed on the main screen.
* You cannot simultaneously display the screens of signals of the
same type, such as two types of PC input signals or two types of AV
input signals.
* The dual screen display cannot be used with the combination of PC1
and AV2 or of AV1 and PC2.
Note:
•  You might infringe on a copyright of the author which is protected
by copyright law when you display the images of the computer
screen and television/VCR simultaneously for profit-making or to
show the image to the public.
•  The screen size for dual-screen display is the same as the screen
size for single-screen display. The Dot by Dot screen is displayed in
NORMAL size except when it is set as the PIP main screen.
•  When dual-screen display is selected, the AUTO INPUT CHANGE
function is disabled.
• When dual-screen display is selected, the screen cannot be
enlarged.
•  When dual-screen display is selected, the following adjustments of
ADVANCED are invalid and adjusting is disabled.
3D-NR, MPEG-NR and 3D-Y/C
•  When dual-screen display is selected, the INPUT SELECT options
cannot be set.
Input mode
Video
Audio
AV1 DVI-D
*1
AV1 input terminal
AV audio input
terminals
AV2 HDMI
*2
AV2 input terminal
AV3 COMPONENT
*1
AV3 input terminals
AV4 S-VIDEO
AV4 input terminal
AV5 VIDEO
AV5 input terminal
*1 Select the terminal for DVI SELECT.
*2  Select the terminal for HDMI SELECT.
Select the terminal for HDMI AUDIO SELECT which is used for
audio input
*3 Select the terminal for BNC SELECT.
MENU button
Displays and turns off the menu screen
SIZE button
The menu is displayed.
Press 
 or 
 to select the screen size.
10°
16.4 feet (5 m
)
16.4 feet (5 m)
16.4 feet (5 m)
Remote control sensor
10°
PIP
A sub screen is displayed
inside a main screen.
PbyP
A ma in  scre en  an d  a su b
scree n are d isplayed  in  a
line.
PbyP2
D i s p l a y s   a   m a i n   s c r e e n
which measures 1280 pixels
in the longest direction and a
sub screen in a line.
Main screen 
Sub 
screen
Main  
screen 
Sub 
screen
Main screen 
Sub 
screen
Page of 118
Display

Click on the first or last page to see other PN-S525 (serv.man3) service manuals if exist.