Read Sharp PN-S525 (serv.man3) Service Manual online
PN-S525
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 4
■ Binding Cables
[Attaching the cable clamp]
The cables connected to the terminals on the back of the monitor can
be neatly bundled using the supplied cable clamps as shown in the
illustration.
illustration.
Caution:
• Verify the position for attaching a cable clamp in advance.
• A cable clamp cannot be removed once it is attached.
[Fastening the power cord]
1) Attach the supplied power cord clamp to the power cord, making
sure the power cord clamp is circular hole-sidedown.
2) Insert the tip of the band into the hole for the power cord clamp.
3) While holding the tail of the band, slide the fastened part toward the
AC input terminal.
2. ADJUSTMENT METHOD
[ADJUSTMENTS FOR PC SCREEN DISPLAY]
■ Automatic adjustment
When you use the PC3 input terminal or PC4 input terminals to display
a PC screen for the first time, or when you change the setting of the PC,
a PC screen for the first time, or when you change the setting of the PC,
use the automatic screen adjustment.
1) Switch the input to PC3 or to PC4 and display the adjustment pat-
tern. (See the description below.)
2) Press
and use
or
to display the SCREEN menu.
3) Press
and select “AUTO”.
4) Press .
The automatic adjustment is complete in several seconds.
5. Press
twice to close the menu screen.
Note:
• If the screen cannot be adjusted properly with one automatic adjust-
ment, repeat the automatic adjustment two or three times. Try man-
ual adjustment if necessary.
■ Screen display for adjustment
Before making adjustments in the SCREEN menu or PICTURE menu,
display an image to brighten the entire screen. If you are using a Win-
dows PC, use the adjustment pattern on the supplied CD-ROM.
dows PC, use the adjustment pattern on the supplied CD-ROM.
<Opening the adjustment pattern>
1) Load the supplied CD-ROM into the computer’s CD-ROM drive.
2) Open the CD-ROM in [My Computer].
3) Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4) When adjustment is finished, press the [Esc] on the computer’s key-
board to quit the adjustment program.
5) Eject the CD-ROM from the CD-ROM drive.
Note:
• If the display mode on the computer you are using is 65,000 colors,
the color levels in the color pattern may appear differently or gray-
scale may appear to be colored.
(This is due to the specifications of the input signal and is not a mal-
(This is due to the specifications of the input signal and is not a mal-
function.)
Hole for
the power
the power
cord clamp
Fastened
part
part
Band
Power cord
clamp
clamp
Cable clamp
Insert the cable
clamp into a hole.
(any hole available)
clamp into a hole.
(any hole available)
Cable clamp
attachment
Cable clamp
positions
1
2
3
MENU
MENU
Click on the first or last page to see other PN-S525 (serv.man3) service manuals if exist.